We are proud to announce our Invisible Sun R Strips and more....

Post by **Invisible Sun** » Thu Jun 20, 2019 10:26 pm

Firstly, hi to everyone at GR420 we have a few new products we would like to share with you all, so please take a moment to have a look at what's new and up coming.

Invisible Sun Led are excited to announce the 1st wave of new products powered by Samsung Lm301h and Lh351h chip sets.
As probably most of you are aware the lm301h has been on our radar for well over 6 months and after much testing and selection we are very pleased to be able to announce that the following products are available.

ISH150 PCB V3 powered by Samsung LM301H CRI90

The ISH150 pcb is a direct upgrade on one of our most popular PCB's.

Specifications

Powered by 150 Samsung LM301H, 30v, 300v rated 9 amp connectors.
Max current 3000mA, No heatsink required @75w or less
CE marked, Manufactured in the United Kingdom.
3 Year Warranty
Available 3000k and 3500k
https://invisiblesunled.co.uk/collectio ... ung-lm301h

Invisible Sun R Strip V3 - powered by Samsung LM301H / LH351H deep red (660nm) LH351H far red (730nm)

Specifications

Powered by Samsung 108 x LM301H and 6 x LH351H / 4 x 660nm / 2 x 730nm
28.5v, Max Current 2100mA
300v rated wago connectors
M3 mounting holes
Manufactured in the United Kingdom
3 Year Warranty
CE

Each strip is rated at 59.85w on its max current of 2100mA

59.85w @ 2100mA

49.87w @ 1750mA

39.90w @ 1400mA

29.92w @ 1050mA

19.95w @ 700mA

https://invisiblesunled.co.uk/collectio ... -sun-strip

Coming soon
ISH272R - Powered by Samsung LM301H /LH351H

ISH288 V3 -Powered by Samsung LM301H

Out now
ISH320 V3 powered by Samsung LM301H CRI 90

https://invisiblesunled.co.uk/collectio ... ung-lm301h

New kits including the R Strips and ISH272R boards will be announced over the coming week.

Thank you for your time an we hope you like our new range.

Thanks from us all

Rich, Kev and Bex

Post by **The Aspie Toker** » Thu Jun 20, 2019 10:43 pm

Thanks, guys. It's a bit techy for me, but will take a look. The strips sound interesting.

GMO · Post by **GMO** » Sun Jun 23, 2019 12:07 am

Serious hardware coming from the best quality light manufacturer in UK! probably the world!

thanks for keeping us up to speed on the ever changing LED market!

Smallpaulus · Post by **Smallpaulus** » Mon Jun 24, 2019 7:49 pm

Heya chaps,

Regarding the new Invisible Sun R Strip V3. Will they need heat sinks at higher loads? If so, will you be making them available as a kit soon?

Also would you be making strip kits available with relevant drivers?

Great looking product, I must say!

Post by **Invisible Sun** » Fri Jun 28, 2019 1:18 pm

Hi Sorry for the delay in reply, been a bit busy.

The R STRIPS will require a heatsink over 1400mA, we will be releasing Heatplates for mounting on to our frame sets, full kits available soon