Soo thought I'd do a little write up on what I've built.
Firstly the clone/veg cabinet
Its dimensions are 90*90*200
Inside theres a clone shelf with the dimensions of 45*45*50 and this will eventually site a low profile aerocloner. For lighting I'm using a single 13w cfl
Behind the clone shelf there's a 6" fan on a speed/temp controller, with the ducting coming out the roof and down into flower cabinet inlet (once the flower cab is up and running I plan on moving the fan + filter into the flower cab and having passive intake from veg into flower out the roof of flower)
Underneath is the vegging area with dimensions of 90*90*150
In here I have a 16" fan bungee'd to the bottom of the clone shelf, this is used to cool the light and it also blows through the light frame and onto the plants
The light is 4 3500k vero29's on 140mm pin heatsinks, these are run by a dimmable meanwell 300w driver, the frames built with some iron angle I had laying around..
Underneath is where my wilma system usually is.. But the og is far to big for the room now (kept vegging till I got rid of mites)
There's also a 6" passive inlet with ducting soon to be connected to a airbrick
There's not much to say about the flower cabinet yet.. For obvious reasons I'm restricted on who I can ask for help on this project, so I'm forever waiting on my brother to be free to help
Once the door has been done its pretty much all systems go
Im going to do the same thing again with hanging a large fan from bungees blowing through the lights
The light is the same frame but with 8 3500k cobs, two 18w 12.0 uv bulbs (only running for 2 hours during mid lights on) and two of the growmau5 far red initiator pucks (come on for 15 minutes before lights on and 15 minutes as lights off)
I will update with more pics as I build the aerocloner and finish and fit out the flower cab
Lukeypoo
Sent from my G8141 using Tapatalk
Welcome to the grow room designs and equipment section. Every grower faces different obstacles when setting up a cannabis grow room. Use this section to discuss the different types of grow rooms you use or would like information about to grow cannabis. To become part of our online cannabis growing community click here to register.
Lukeypoo's perpetual cabinets
- Smokey
- Registered User
- Posts: 11786
- Joined: Tue Oct 31, 2017 12:05 am
- Location: Mount Zion
- Has thanked: 39 times
- Been thanked: 156 times
- Contact:
- Status: Offline
Re: Lukeypoo's perpetual cabinets
Cracking Stuff Lukey boy, Lovely little build this pal and I'm totally digging the attention to detail I reckon you built a lovely little room and environment to produce tasteful big old monsters in there............ Thanks A million for sharing with us be subbed up for all the forthcoming diaires thats for damn sure
Awesome project, love it
Smokes
Awesome project, love it
Smokes
- The Aspie Toker
- GR420 Leg End
- Posts: 14730
- Joined: Tue Oct 24, 2017 7:45 pm
- Location: Your mother's bedroom.
- Has thanked: 5848 times
- Been thanked: 3412 times
- Status: Offline
Re: Lukeypoo's perpetual cabinets
A lovely clean and tidy set up you have there, mate. I tip my hat to you.
Never give advice. Wise men don't need advice. Fools won't take it.
- Smokey
- Registered User
- Posts: 11786
- Joined: Tue Oct 31, 2017 12:05 am
- Location: Mount Zion
- Has thanked: 39 times
- Been thanked: 156 times
- Contact:
- Status: Offline
Re: Lukeypoo's perpetual cabinets
The Aspie Toker wrote: ↑Tue Mar 12, 2019 11:33 pmA lovely clean and tidy set up you have there, mate. I tip my hat to you.