Welcome to the grow room designs and equipment section. Every grower faces different obstacles when setting up a cannabis grow room. Use this section to discuss the different types of grow rooms you use or would like information about to grow cannabis. To become part of our online cannabis growing community click here to register.

Lukeypoo's perpetual cabinets

Discuss setting up your space & what equipment to use
Post Reply
User avatar
Lukeypoo
Registered User
Posts: 54
Joined: Sun Feb 17, 2019 9:22 am
Location: Southwest
Has thanked: 0
Been thanked: 0
Status: Offline

Lukeypoo's perpetual cabinets

Post by Lukeypoo »

Soo thought I'd do a little write up on what I've built.
Firstly the clone/veg cabinet
Its dimensions are 90*90*200
Inside theres a clone shelf with the dimensions of 45*45*50 and this will eventually site a low profile aerocloner. For lighting I'm using a single 13w cfl
Behind the clone shelf there's a 6" fan on a speed/temp controller, with the ducting coming out the roof and down into flower cabinet inlet (once the flower cab is up and running I plan on moving the fan + filter into the flower cab and having passive intake from veg into flower out the roof of flower)

Underneath is the vegging area with dimensions of 90*90*150
In here I have a 16" fan bungee'd to the bottom of the clone shelf, this is used to cool the light and it also blows through the light frame and onto the plants
The light is 4 3500k vero29's on 140mm pin heatsinks, these are run by a dimmable meanwell 300w driver, the frames built with some iron angle I had laying around..
Underneath is where my wilma system usually is.. But the og is far to big for the room now (kept vegging till I got rid of mites)
There's also a 6" passive inlet with ducting soon to be connected to a airbrick


There's not much to say about the flower cabinet yet.. For obvious reasons I'm restricted on who I can ask for help on this project, so I'm forever waiting on my brother to be free to help
Once the door has been done its pretty much all systems go

Im going to do the same thing again with hanging a large fan from bungees blowing through the lights
The light is the same frame but with 8 3500k cobs, two 18w 12.0 uv bulbs (only running for 2 hours during mid lights on) and two of the growmau5 far red initiator pucks (come on for 15 minutes before lights on and 15 minutes as lights off)

I will update with more pics as I build the aerocloner and finish and fit out the flower cab
Lukeypoo

Sent from my G8141 using Tapatalk

✌️Lukeypoo✌️

User avatar
Smokey
Registered User
Posts: 11786
Joined: Tue Oct 31, 2017 12:05 am
Location: Mount Zion
Has thanked: 39 times
Been thanked: 156 times
Contact:
Status: Offline

Re: Lukeypoo's perpetual cabinets

Post by Smokey »

Cracking Stuff Lukey boy, Lovely little build this pal and I'm totally digging the attention to detail I reckon you built a lovely little room and environment to produce tasteful big old monsters in there............ Thanks A million for sharing with us be subbed up for all the forthcoming diaires thats for damn sure

Awesome project, love it

Smokes
Image
🍁 Who Jah Bless No Man Curse 🍁

User avatar
The Aspie Toker
GR420 Leg End
Posts: 14730
Joined: Tue Oct 24, 2017 7:45 pm
Location: Your mother's bedroom.
Has thanked: 5848 times
Been thanked: 3412 times
Status: Offline

Re: Lukeypoo's perpetual cabinets

Post by The Aspie Toker »

A lovely clean and tidy set up you have there, mate. I tip my hat to you.
Never give advice. Wise men don't need advice. Fools won't take it.

User avatar
Smokey
Registered User
Posts: 11786
Joined: Tue Oct 31, 2017 12:05 am
Location: Mount Zion
Has thanked: 39 times
Been thanked: 156 times
Contact:
Status: Offline

Re: Lukeypoo's perpetual cabinets

Post by Smokey »

The Aspie Toker wrote:
Tue Mar 12, 2019 11:33 pm
A lovely clean and tidy set up you have there, mate. I tip my hat to you.
:i agree: :i agree: :i agree: :i agree: :i agree: :i agree:

Post Reply

Return to “Grow Room Designs & Equipment”