Josh's Dwc

[Josh]

Looks a little overwatered to me mate. Sounds weird eh but I had same problem , think my water level mightta been to high for a young plant. Knock on Hoppers door mate.

Hopefully she starts reaching for the light in the next couple days, maybe it's still shocked from the transplant. I I was under the impression there's no such thing as over-watering as long as you have enough are bubbles? The water level is at least 3-4 inches below the bottom of the net cup

Sent from my LGMP260 using Tapatalk

[Nanook]

they can be too deep in dwc imo especially young. More liable to stem rot if theres not a small airflow and tbh, the bubbles splash enough onto the upper part anyhow :)

[Josh]

Thanks grouse, if she's not looking better by tomorrow I'll drop the water level again

they can be too deep in dwc imo especially young. More liable to stem rot if theres not a small airflow and tbh, the bubbles splash enough onto the upper part anyhow :)

Sent from my LGMP260 using Tapatalk

[Clunge Muncher]

I set mine to roughly half a inch below the pot bubbling and have no problems, could say she's thriving

From Me Phone Enit..

[Josh]

Hmm, what depth did you set it at clone/seedling stage? 3-4 sets of leaves I guess.

Just lowered it quite a bit, roots just barely in the water. I'll see if that helps

I set mine to roughly half a inch below the pot bubbling and have no problems, could say she's thriving

From Me Phone Enit..

Sent from my LGMP260 using Tapatalk

[Hobbit]

Hmm, what depth did you set it at clone/seedling stage? 3-4 sets of leaves I guess.

Just lowered it quite a bit, roots just barely in the water. I'll see if that helps

I set mine to roughly half a inch below the pot bubbling and have no problems, could say she's thriving

From Me Phone Enit..

Sent from my LGMP260 using Tapatalk

I found when my roots were all stuck together with water like yours, was over watered. You may have your turbulence a little high for the level you had your water set mate. Rekon you be right with it lower.

[Josh]

Hmm, what depth did you set it at clone/seedling stage? 3-4 sets of leaves I guess.

Just lowered it quite a bit, roots just barely in the water. I'll see if that helps

I set mine to roughly half a inch below the pot bubbling and have no problems, could say she's thriving

From Me Phone Enit..

Sent from my LGMP260 using Tapatalk

I found when my roots were all stuck together with water like yours, was over watered. You may have your turbulence a little high for the level you had your water set mate. Rekon you be right with it lower.

Thanks hobbit I never even thought of that, hopefully it makes a difference

Sent from my LGMP260 using Tapatalk

[Hobbit]

Hmm, what depth did you set it at clone/seedling stage? 3-4 sets of leaves I guess.

Just lowered it quite a bit, roots just barely in the water. I'll see if that helps

Sent from my LGMP260 using Tapatalk

I found when my roots were all stuck together with water like yours, was over watered. You may have your turbulence a little high for the level you had your water set mate. Rekon you be right with it lower.

Thanks hobbit I never even thought of that, hopefully it makes a difference

Sent from my LGMP260 using Tapatalk

Only thoughts mate as I said I had a lot of drama getting them started in my main system. In my mind its a piece of cake but reality wasnt. I still never got one to go lol. I found aeroponics far easier at the seedling stage.

[Clunge Muncher]

Hmm, what depth did you set it at clone/seedling stage? 3-4 sets of leaves I guess.

Just lowered it quite a bit, roots just barely in the water. I'll see if that helps

I set mine to roughly half a inch below the pot bubbling and have no problems, could say she's thriving

From Me Phone Enit..

Sent from my LGMP260 using Tapatalk

This was it when I got it, barely any roots on, watered from the top for a while and boom..


From Me Phone Enit..

[Clunge Muncher]

And now like this

From Me Phone Enit..