Hi I’m new to this doing a couple autos just into week 1 and only have space for a 1mx1m x2m tent
I can do some electronics and soldering etc, good diy knollage
Running diy led array 5000K 4x 25w bars chips probably not designed to be used for grow or full spectrum.
My lighting question is do I stick with what I have and just make do? I can supplement a bit with extra bars at 5kK and 3kK later in the grow or do I shell out now for a decent LED full spectrum light and if so which would be recommended for my space without breaking the bank?
Is it worth looking at used units on eBay?
Brands to avoid? I see invisible sun are sponsors so I’m guessing they’re trusted good brand but not sure what would work for just a few plants in a smallish area.
Dave
Welcome to the grow room designs and equipment section. Every grower faces different obstacles when setting up a cannabis grow room. Use this section to discuss the different types of grow rooms you use or would like information about to grow cannabis. To become part of our online cannabis growing community click here to register.
LED advice for 1.0x1.0
-
- Registered User
- Posts: 19
- Joined: Thu Jun 20, 2024 5:38 pm
- Has thanked: 30 times
- Been thanked: 37 times
- Status: Offline
LED advice for 1.0x1.0
- These users thanked the author MyMateDave for the post (total 5):
- Marcus (Sun Jun 23, 2024 9:00 pm) • Wrh (Sun Jun 23, 2024 9:11 pm) • Herbalist (Tue Jun 25, 2024 10:09 am) • Labs Dexter (Tue Jun 25, 2024 11:42 am) • 2-Scoops (Tue Jun 25, 2024 12:51 pm)
- Marcus
- Registered User
- Posts: 5319
- Joined: Thu Nov 29, 2018 2:25 pm
- Has thanked: 2252 times
- Been thanked: 4153 times
- Status: Offline
Re: LED advice for 1.0x1.0
Hi Dave's mate.
In a 1x1m I've run a 240w Led. That seems to be the size most go for. I'd say grab whatever brand suits your budget really.
I've seen loads of damn fine grows with cheap blurples if budget is a problem.
Myself I prefer to run a 315w CMH, so am a little out of the loop with LEDs but I'm sure someone will be along shortly to help answer your questions.
In a 1x1m I've run a 240w Led. That seems to be the size most go for. I'd say grab whatever brand suits your budget really.
I've seen loads of damn fine grows with cheap blurples if budget is a problem.
Myself I prefer to run a 315w CMH, so am a little out of the loop with LEDs but I'm sure someone will be along shortly to help answer your questions.
- These users thanked the author Marcus for the post (total 4):
- Herbalist (Tue Jun 25, 2024 10:09 am) • 2-Scoops (Tue Jun 25, 2024 10:31 am) • Labs Dexter (Tue Jun 25, 2024 11:42 am) • MyMateDave (Sun Jul 14, 2024 5:41 pm)
- seymore_budz
- Registered User
- Posts: 2389
- Joined: Mon Sep 09, 2019 7:18 pm
- Has thanked: 619 times
- Been thanked: 1448 times
- Contact:
- Status: Offline
Re: LED advice for 1.0x1.0
Hey Dave,MyMateDave wrote: ↑Sat Jun 22, 2024 6:15 pmHi I’m new to this doing a couple autos just into week 1 and only have space for a 1mx1m x2m tent
I can do some electronics and soldering etc, good diy knollage
Running diy led array 5000K 4x 25w bars chips probably not designed to be used for grow or full spectrum.
My lighting question is do I stick with what I have and just make do? I can supplement a bit with extra bars at 5kK and 3kK later in the grow or do I shell out now for a decent LED full spectrum light and if so which would be recommended for my space without breaking the bank?
Is it worth looking at used units on eBay?
Brands to avoid? I see invisible sun are sponsors so I’m guessing they’re trusted good brand but not sure what would work for just a few plants in a smallish area.
Dave
Personally I would just buy a new LED. There have been several jumps in quality and efficiency over the last two years. I'm as tight as they come and also have knocked up my own units but, the latest iteration of diodes are far superior to the old so I'm currently retiring mine one at a time.
For a 1m2 tent, I'd be looking at the 300-400w range. Here's some suggestions.
https://viparspectra.co.uk/products/vip ... grow-light
https://lumatek-lighting.com/ats300w-pro/
https://spiderfarmer.co.uk/products/se3 ... row-light/
You may find a unit second hand on eBay. I find a lot of bargains on FB marketplace too. Lots of people doing one grow then sell the bits on. Saying that, 200-300 quid for a new one that will last you 5-6 years ain't a bad investment IMHO.
- These users thanked the author seymore_budz for the post (total 4):
- Wrh (Mon Jun 24, 2024 12:27 pm) • Herbalist (Tue Jun 25, 2024 10:07 am) • Labs Dexter (Tue Jun 25, 2024 11:41 am) • MyMateDave (Sun Jul 14, 2024 5:41 pm)
Those who can make you believe absurdities can make you commit atrocities.
- 2-Scoops
- Registered User
- Posts: 6236
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 3643 times
- Been thanked: 3518 times
- Status: Offline
Re: LED advice for 1.0x1.0
You can get some decent Chinese brands at fair prices, just make sure it has a minimum lm301b chipset or even better the lm301h or evo chip i think is newer one all 3 rate high with umol ratings and all 3 are Samsung chips that perform very well for LED`s. I think Mars Hydro still use the older Samsung lm301b so you may find a bargain with theirs. Make sure you look at at true power draw for real wattage not the "600w or 1000w equivalent" etc etc that lots of Chinese makers add to sell their products, its just sales spiel. Ive seen a good few decent grows done with DIY LED jobbies in past too but yes if you buy a light you can use the DIY jobby to veg and get plants ready for next grow whilst you got one flowering = more crops per year.
- These users thanked the author 2-Scoops for the post (total 2):
- Labs Dexter (Tue Jun 25, 2024 11:41 am) • MyMateDave (Sun Jul 14, 2024 5:40 pm)
"But your still looking at me that same damn way............ Like i just shit in your scrambled eggs" > Negan, Walking Dead
- Labs Dexter
- Registered User
- Posts: 1713
- Joined: Thu Dec 05, 2019 4:33 pm
- Has thanked: 1962 times
- Been thanked: 890 times
- Contact:
- Status: Offline
Re: LED advice for 1.0x1.0
What they all said ^^
- These users thanked the author Labs Dexter for the post (total 2):
- Herbalist (Wed Jul 03, 2024 9:11 am) • MyMateDave (Sun Jul 14, 2024 5:41 pm)
Thanks for looking in and God bless
-
- Registered User
- Posts: 19
- Joined: Thu Jun 20, 2024 5:38 pm
- Has thanked: 30 times
- Been thanked: 37 times
- Status: Offline
Re: LED advice for 1.0x1.0
Thank you everyone, I’ve decided to go with a full spectrum light and get rid of my diy strips, maybe I can reuse it for seedlings in the future.
Im picking up a used lumatek ats300 pro 2.7, hopefully that’ll be about right for the space, give good results and economy.
Dave
Im picking up a used lumatek ats300 pro 2.7, hopefully that’ll be about right for the space, give good results and economy.
Dave
- These users thanked the author MyMateDave for the post (total 4):
- 2-Scoops (Thu Jun 27, 2024 9:40 am) • Marcus (Thu Jun 27, 2024 1:02 pm) • Wrh (Thu Jun 27, 2024 1:20 pm) • Labs Dexter (Fri Jun 28, 2024 10:55 am)
- 2-Scoops
- Registered User
- Posts: 6236
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 3643 times
- Been thanked: 3518 times
- Status: Offline
Re: LED advice for 1.0x1.0
My mate uses Lumatek they are decent lights.MyMateDave wrote: ↑Wed Jun 26, 2024 4:22 pmThank you everyone, I’ve decided to go with a full spectrum light and get rid of my diy strips, maybe I can reuse it for seedlings in the future.
Im picking up a used lumatek ats300 pro 2.7, hopefully that’ll be about right for the space, give good results and economy.
Dave
- These users thanked the author 2-Scoops for the post:
- Labs Dexter (Fri Jun 28, 2024 10:55 am)
- Marcus
- Registered User
- Posts: 5319
- Joined: Thu Nov 29, 2018 2:25 pm
- Has thanked: 2252 times
- Been thanked: 4153 times
- Status: Offline
Re: LED advice for 1.0x1.0
Looks like a half decent light on paper!MyMateDave wrote: ↑Wed Jun 26, 2024 4:22 pmThank you everyone, I’ve decided to go with a full spectrum light and get rid of my diy strips, maybe I can reuse it for seedlings in the future.
Im picking up a used lumatek ats300 pro 2.7, hopefully that’ll be about right for the space, give good results and economy.
Dave
- These users thanked the author Marcus for the post (total 2):
- Labs Dexter (Fri Jun 28, 2024 10:54 am) • MyMateDave (Sun Jul 14, 2024 5:41 pm)