Sink the Bismark. Build a log cabin. Release the Kraken. Get something down on paper. I've got to see a man about a horse!ohlordyeah_420 wrote: ↑Sun May 02, 2021 5:59 pmDrop the kids off at the poolsybarite wrote: ↑Sun May 02, 2021 5:04 pmHaha, it's just a shame I can't look at the plants while dropping the kids off - never heard that euphemism before, thanks :Dohlordyeah_420 wrote: ↑Sun May 02, 2021 4:31 pmThere's me taking an old issue of high times for a read when I go drop the kids off and you're living in the year 3000 with a goddamn clone room in bog.
To take a shit. To drop a piping hot loaf into the commode. To pinch a loaf into the porcelain god.
I was on my way to work and I had to pull over at the gas station and drop the kids off at the pool.
Welcome to the grow room designs and equipment section. Every grower faces different obstacles when setting up a cannabis grow room. Use this section to discuss the different types of grow rooms you use or would like information about to grow cannabis. To become part of our online cannabis growing community click here to register.
New Invisible Sun/T5 propagation/clone room
- sybarite
- Registered User
- Posts: 1500
- Joined: Fri Feb 28, 2020 7:30 pm
- Location: iamnowhere
- Has thanked: 1845 times
- Been thanked: 1151 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
- These users thanked the author sybarite for the post (total 2):
- ohlordyeah_420 (Mon May 03, 2021 7:19 am) • Invisible Sun (Fri Apr 08, 2022 9:28 am)
- 2-Scoops
- Registered User
- Posts: 6236
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 3643 times
- Been thanked: 3518 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
I put me a black mylar door stapled to edges and taped over staples with silver aluminum tape behind my cupboard door to block out any light leaks both ways. I also used stick on zips to open and close its big door flap, but ive also used black velcro before to close of mylar doors although i much prefer the zip up door flaps. Works a treat for blocking of light.
- These users thanked the author 2-Scoops for the post (total 3):
- Wrh (Sun May 30, 2021 1:43 pm) • Invisible Sun (Fri Apr 08, 2022 9:28 am) • sybarite (Fri Apr 08, 2022 11:41 am)
"But your still looking at me that same damn way............ Like i just shit in your scrambled eggs" > Negan, Walking Dead
- sybarite
- Registered User
- Posts: 1500
- Joined: Fri Feb 28, 2020 7:30 pm
- Location: iamnowhere
- Has thanked: 1845 times
- Been thanked: 1151 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
Now that's magic! Sorry @2-Scoops, only just seen this. Cool tips, thank you! I left my Mylar overlapping at the edges of the doors, and due to the way it's curved from being on a roll, it formed natural flaps that sealed out light pretty well, but some gaps have started appearing, probably due to environmental changes, so your suggestions are helpful.2-Scoops wrote: ↑Mon May 03, 2021 1:06 pmI put me a black mylar door stapled to edges and taped over staples with silver aluminum tape behind my cupboard door to block out any light leaks both ways. I also used stick on zips to open and close its big door flap, but ive also used black velcro before to close of mylar doors although i much prefer the zip up door flaps. Works a treat for blocking of light.
Last edited by sybarite on Fri Apr 08, 2022 3:04 pm, edited 1 time in total.
- These users thanked the author sybarite for the post (total 3):
- Marcus (Fri Apr 08, 2022 3:03 pm) • Invisible Sun (Fri Apr 08, 2022 8:21 pm) • 2-Scoops (Sat Apr 09, 2022 12:03 pm)
- Marcus
- Registered User
- Posts: 5319
- Joined: Thu Nov 29, 2018 2:25 pm
- Has thanked: 2252 times
- Been thanked: 4153 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
I've released a few otters into the wild from time to time.ohlordyeah_420 wrote: ↑Sun May 02, 2021 5:59 pmDrop the kids off at the poolsybarite wrote: ↑Sun May 02, 2021 5:04 pmHaha, it's just a shame I can't look at the plants while dropping the kids off - never heard that euphemism before, thanks :Dohlordyeah_420 wrote: ↑Sun May 02, 2021 4:31 pmThere's me taking an old issue of high times for a read when I go drop the kids off and you're living in the year 3000 with a goddamn clone room in bog.
To take a shit. To drop a piping hot loaf into the commode. To pinch a loaf into the porcelain god.
I was on my way to work and I had to pull over at the gas station and drop the kids off at the pool.
- These users thanked the author Marcus for the post (total 3):
- sybarite (Fri Apr 08, 2022 3:04 pm) • ohlordyeah_420 (Fri Apr 08, 2022 3:19 pm) • Invisible Sun (Fri Apr 08, 2022 8:21 pm)
- Marcus
- Registered User
- Posts: 5319
- Joined: Thu Nov 29, 2018 2:25 pm
- Has thanked: 2252 times
- Been thanked: 4153 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
I used gorilla tape to seal some kitchen cupboards when I used to grow in them.sybarite wrote: ↑Fri Apr 08, 2022 2:49 pmSorry @2-Scoops, only just seen this. Cool tips, thank you! I left my Mylar overlapping at the edges of the doors, and due to the way it's curved from being on a roll, it formed natural flaps that sealed out light pretty well, but some gaps have started appearing, probably due to environmental changes, so your suggestions are helpful.2-Scoops wrote: ↑Mon May 03, 2021 1:06 pmI put me a black mylar door stapled to edges and taped over staples with silver aluminum tape behind my cupboard door to block out any light leaks both ways. I also used stick on zips to open and close its big door flap, but ive also used black velcro before to close of mylar doors although i much prefer the zip up door flaps. Works a treat for blocking of light.
Fold the tape in near enough half along the length, but leave a strip of the sticky side showing and then just tape it to the side of the cabs.
Worked a treat. Ripped the laminate off the cabinets when I removed it though.
I do like that little "plopagation" space though.
- These users thanked the author Marcus for the post (total 2):
- sybarite (Fri Apr 08, 2022 3:15 pm) • Invisible Sun (Fri Apr 08, 2022 8:21 pm)
- sybarite
- Registered User
- Posts: 1500
- Joined: Fri Feb 28, 2020 7:30 pm
- Location: iamnowhere
- Has thanked: 1845 times
- Been thanked: 1151 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
PlopagationMarcus wrote: ↑Fri Apr 08, 2022 3:05 pmI used gorilla tape to seal some kitchen cupboards when I used to grow in them.
Fold the tape in near enough half along the length, but leave a strip of the sticky side showing and then just tape it to the side of the cabs.
Worked a treat. Ripped the laminate off the cabinets when I removed it though.
I do like that little "plopagation" space though.
Love that!
- These users thanked the author sybarite for the post (total 2):
- Marcus (Fri Apr 08, 2022 3:38 pm) • Invisible Sun (Fri Apr 08, 2022 8:21 pm)
- Keeno
- Registered User
- Posts: 25547
- Joined: Sat Oct 07, 2017 10:11 pm
- Has thanked: 8242 times
- Been thanked: 12990 times
- Contact:
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
How did I miss this. Very cool @sybarite
- These users thanked the author Keeno for the post (total 2):
- sybarite (Fri Apr 08, 2022 3:18 pm) • Invisible Sun (Fri Apr 08, 2022 8:22 pm)
- sybarite
- Registered User
- Posts: 1500
- Joined: Fri Feb 28, 2020 7:30 pm
- Location: iamnowhere
- Has thanked: 1845 times
- Been thanked: 1151 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
- These users thanked the author sybarite for the post:
- Invisible Sun (Fri Apr 08, 2022 8:22 pm)
- sybarite
- Registered User
- Posts: 1500
- Joined: Fri Feb 28, 2020 7:30 pm
- Location: iamnowhere
- Has thanked: 1845 times
- Been thanked: 1151 times
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
The Duronic mini-dehumidifier I was initially pleased with failed just outside the warranty, so one to avoid. Replaced it with a ProBreeze one that draws out moisture faster and got the 3 year warranty, back of the net!
- These users thanked the author sybarite for the post:
- Invisible Sun (Fri Apr 08, 2022 8:22 pm)
- Invisible Sun
- Posts: 746
- Joined: Fri Jul 20, 2018 12:19 am
- Has thanked: 287 times
- Been thanked: 911 times
- Contact:
- Status: Offline
Re: New Invisible Sun/T5 propagation/clone room
It is cool , kudos on the set up
For further information on our products please visit our website www.invisiblesunled.co.uk