Tour of the Death Star & attack of the clones
- MrNice
- Registered User
- Posts: 10709
- Joined: Fri Apr 24, 2020 7:25 pm
- Has thanked: 7479 times
- Been thanked: 9552 times
- Status: Offline
-
Guest
- Registered User
- Posts: 7654
- Joined: Thu Jan 16, 2020 11:14 pm
- Has thanked: 10686 times
- Been thanked: 6785 times
- Status: Offline
Re: Tour of the Death Star & attack of the clones
Lovely jubbly.
I could do with a bag of that.
Treat people as if they were what they ought to be and you help them to become what they are capable of being.”
JOHANN WOLFGANG VON GOETHE
-----------------------------------------------------------------------------
"Insects and disease are the symptoms of a failing crop, not the cause of it. It's not the overpowering invader we must fear but the weakened condition of the victim."
William Albrecht
https://www.organacanna.co.uk/
JOHANN WOLFGANG VON GOETHE
-----------------------------------------------------------------------------
"Insects and disease are the symptoms of a failing crop, not the cause of it. It's not the overpowering invader we must fear but the weakened condition of the victim."
William Albrecht
https://www.organacanna.co.uk/
-
Guest
- Registered User
- Posts: 7654
- Joined: Thu Jan 16, 2020 11:14 pm
- Has thanked: 10686 times
- Been thanked: 6785 times
- Status: Offline
Re: Tour of the Death Star & attack of the clones
That's an idea about the watering, I'm sure they'll be a few here that'll make use it that.
- Vador
- Registered User
- Posts: 2580
- Joined: Thu Sep 30, 2021 10:47 pm
- Has thanked: 1840 times
- Been thanked: 2682 times
- Contact:
- Status: Offline
Re: Tour of the Death Star & attack of the clones
I forgot to mention there’s a piece of hose poking out the top with a funnel for pouring in.
At the moment I collect 2L milk cartons, no joking I have about 20 of them, they get filled from a 25L barrel ready for the next feed, then I have to transfer it from the milk carton into the watering can without spilling it all over the floor, then got to water the plants which takes time too.
If I can get this working how I’d like it then I can cut out the watering can and pour straight from the milk carton into the funnel, that will save me a little bit of time each feeding too.
At the moment I collect 2L milk cartons, no joking I have about 20 of them, they get filled from a 25L barrel ready for the next feed, then I have to transfer it from the milk carton into the watering can without spilling it all over the floor, then got to water the plants which takes time too.
If I can get this working how I’d like it then I can cut out the watering can and pour straight from the milk carton into the funnel, that will save me a little bit of time each feeding too.
░█▒█▒▄▀▄░█▀▄░▄▀▄▒█▀▄
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄
Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄
Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.
- Vador
- Registered User
- Posts: 2580
- Joined: Thu Sep 30, 2021 10:47 pm
- Has thanked: 1840 times
- Been thanked: 2682 times
- Contact:
- Status: Offline
Re: Tour of the Death Star & attack of the clones
Just a shame there wasn’t more of it, definitely going to try flowering without the parabolic next time and see if there’s an improvement in yield
- Vador
- Registered User
- Posts: 2580
- Joined: Thu Sep 30, 2021 10:47 pm
- Has thanked: 1840 times
- Been thanked: 2682 times
- Contact:
- Status: Offline
Re: Tour of the Death Star & attack of the clones
This is the design so far, Any ideas/ improvements?

Pretty self explanatory, It slots around the stem of the plant and then drops down and sits on the coco, Thinking I might even make some legs/spikes to raise it off the coco just a little bit.
There's a 14mm hole at the back for the hose pipe to poke through, just a cable tie either side to keep the hose in place.
The holes are 2mm but im tempted to make them smaller, going to do some test prints first with a few different sized holes in it and pick the best size for the final design.
Got some PLA on order so will get one printed off when that turns up then give it a try.
Pretty self explanatory, It slots around the stem of the plant and then drops down and sits on the coco, Thinking I might even make some legs/spikes to raise it off the coco just a little bit.
There's a 14mm hole at the back for the hose pipe to poke through, just a cable tie either side to keep the hose in place.
The holes are 2mm but im tempted to make them smaller, going to do some test prints first with a few different sized holes in it and pick the best size for the final design.
Got some PLA on order so will get one printed off when that turns up then give it a try.
- Vador
- Registered User
- Posts: 2580
- Joined: Thu Sep 30, 2021 10:47 pm
- Has thanked: 1840 times
- Been thanked: 2682 times
- Contact:
- Status: Offline
Re: Tour of the Death Star & attack of the clones
Ive got covid so ill make this quick, The water trays seem to be working a treat, early days yet but so far im happy.

Calmag = 0.8 ml/L
Silicon = 0.5 ml/L
Rootstim = 0.8 ml/L
Fulvic = 0.8 ml/L
E.C = 1.2
P.H = 5.8
Bulb = 250w mh
Clones have been neglected this week but im starting to feel better now so will take better care of them going forward, going to give the clones maybe another week then pull the scrog net out and sling mum in there with them, grow hedges instead of scrog, need to make room for a couple of growouts ive signed up for so its time to flower all the cheeses and make way for some new stuff. Will be interesting to see how this turns out.

Week 19 - Mother
Week 12 - Clones
A+B = 1.2 ml/L Calmag = 0.8 ml/L
Silicon = 0.5 ml/L
Rootstim = 0.8 ml/L
Fulvic = 0.8 ml/L
E.C = 1.2
P.H = 5.8
Bulb = 250w mh
Clones have been neglected this week but im starting to feel better now so will take better care of them going forward, going to give the clones maybe another week then pull the scrog net out and sling mum in there with them, grow hedges instead of scrog, need to make room for a couple of growouts ive signed up for so its time to flower all the cheeses and make way for some new stuff. Will be interesting to see how this turns out.
- MrNice
- Registered User
- Posts: 10709
- Joined: Fri Apr 24, 2020 7:25 pm
- Has thanked: 7479 times
- Been thanked: 9552 times
- Status: Offline
-
Guest
- Registered User
- Posts: 7654
- Joined: Thu Jan 16, 2020 11:14 pm
- Has thanked: 10686 times
- Been thanked: 6785 times
- Status: Offline
Re: Tour of the Death Star & attack of the clones
Lovely Jubbly Vad
I am sure you will soon have these budding out into monsters.
Get well soon and stay safe.
I am sure you will soon have these budding out into monsters.
Get well soon and stay safe.
- Vador
- Registered User
- Posts: 2580
- Joined: Thu Sep 30, 2021 10:47 pm
- Has thanked: 1840 times
- Been thanked: 2682 times
- Contact:
- Status: Offline
Re: Tour of the Death Star & attack of the clones
Thanks chaps, feeling much better now but feeling stoned before even smoking anything so can’t complain really.
I’ve been lucky really, two days of feeling like shit and the rest of the time has just been hot and cold flushes, loss of appetite and lethargic. Just like having a cold really, glad I didn’t vaccinate against any of it