Invisible Sun feed

[MrNice]

very nice ISH265 V3 EVO

Hey Mr IS there no way you can tidy the cabling back to the driver

[MrNice]

very nice ISH265 V3 EVO

Hey Mr IS there no way you can tidy the cabling back to the driver

This is the rear Mr nice

[MrNice]

Sorry was talking about the the twin T5 replacement light the cables coming back from the end of the fitting to the driver

May be some cable cleats or some Cable Tie Bases drag the cables back along the light to the driver so nothink dangling about

[MrNice]

Sorry was talking about the the twin T5 replacement light the cables coming back from the end of the fitting to the driver

May be some cable cleats or some Cable Tie Bases drag the cables back along the light to the driver so nothink dangling about

AHH my bad sorry.

Yeah the H wing was just a prototype , we have increased the middle bridge to be wider to take the driver face forward, that will take any pull from the wires and cable glands, it was initially designed with different drivers in mind but decided on adding the dimmer.

[MrNice]

We have started making our own power inlet boxes for our lights.

We 3d print the boxes from PLO and then add the 3pin connector, solder and insulate the connections , add an additional earth wire eye for grounding the fixture via the heatsink and then add in the cable glands.

We have a whole range of different options we have designed from power inlets for 3 pin and figure 8 to 2,3,4,5 &6 way Junction boxes along with dimmer modules and spectrum control boxes.

If anyone needs anything like the above or custom bits just ask.

[KD]

I'm sure we've had a similar conversation before but can you give me an estimate on shipping to the Canary Islands for an X Bar please

That'd light a 120 x 60 tent nicely right?

[Invisible Sun]

I'm sure we've had a similar conversation before but can you give me an estimate on shipping to the Canary Islands for an X Bar please

That'd light a 120 x 60 tent nicely right?

HI KD

Shipping to the canary Islands is current about £100 from the UK.

The X bar RRP at £549.95 inc vat , so if i remove the VAT its a cost of £458.33 plus shipping of £100 = total cost shipped £558.33

yes the X bar would fit nicely in a 120 x 60

If money is tight the F bar will suit that space too that would be £383.33 shipped to canary islands

[KD]

I'm sure we've had a similar conversation before but can you give me an estimate on shipping to the Canary Islands for an X Bar please

That'd light a 120 x 60 tent nicely right?

HI KD

Shipping to the canary Islands is current about £100 from the UK.

The X bar RRP at £549.95 inc vat , so if i remove the VAT its a cost of £458.33 plus shipping of £100 = total cost shipped £558.33

yes the X bar would fit nicely in a 120 x 60

If money is tight the F bar will suit that space too that would be £383.33 shipped to canary islands

Yeah man that's sound. I'm waiting for inheritance money so I'm treating myself... And my plants. Gonna cost me double that to keep the misses happy too lol

What's the benefits of the X Bar over the F bar?

[Invisible Sun]

I'm sure we've had a similar conversation before but can you give me an estimate on shipping to the Canary Islands for an X Bar please

That'd light a 120 x 60 tent nicely right?

HI KD

Shipping to the canary Islands is current about £100 from the UK.

The X bar RRP at £549.95 inc vat , so if i remove the VAT its a cost of £458.33 plus shipping of £100 = total cost shipped £558.33

yes the X bar would fit nicely in a 120 x 60

If money is tight the F bar will suit that space too that would be £383.33 shipped to canary islands

Yeah man that's sound. I'm waiting for inheritance money so I'm treating myself... And my plants. Gonna cost me double that to keep the misses happy too lol

What's the benefits of the X Bar over the F bar?

the x bar has 4 times the amount of LM301H evo LED than the F bar, because of this it runs ultra efficient at 3.3 umol/j the f bar is no slacker though coming in at 2.9 umol/j - expect the f bar to run a bit warmer than the X bar.

[KD]

HI KD

Shipping to the canary Islands is current about £100 from the UK.

The X bar RRP at £549.95 inc vat , so if i remove the VAT its a cost of £458.33 plus shipping of £100 = total cost shipped £558.33

yes the X bar would fit nicely in a 120 x 60

If money is tight the F bar will suit that space too that would be £383.33 shipped to canary islands

Yeah man that's sound. I'm waiting for inheritance money so I'm treating myself... And my plants. Gonna cost me double that to keep the misses happy too lol

What's the benefits of the X Bar over the F bar?

the x bar has 4 times the amount of LM301H evo LED than the F bar, because of this it runs ultra efficient at 3.3 umol/j the f bar is no slacker though coming in at 2.9 umol/j - expect the f bar to run a bit warmer than the X bar.

X Bar it is then Thank you