Vapeing weed

[Vador]

Just a thought but the lids can be quite tricky to get off the capsules when they are new, best way I found is flick it off with your thumb nail like your popping the head off a daisy, after a couple of uses they free up real nice.
Also if you use your fingers to put the lids on be careful when your pushing down on it, if you’d dent the top of the capsule you end up with a void between the lid and the screen in the vape, this little void makes it possible for debris to escape the capsule as you inhale, it’ll clog up the screen over time.
I use a flat ended pencil to ream out the inside of any dented capsules and make them flat again.
The filling set comes with a special tool for putti the lids on, even if you don’t get the filling set then that little tool is worth getting just to keep your capsules in good condition

[Vador]

Here you go this thing
https://www.storz-bickel.com/en/parts-a ... g-capsules

The whole filling set is good though, sounds a lot but you get all sorts of bits with it

[Treetrunk]

Just a thought but the lids can be quite tricky to get off the capsules when they are new, best way I found is flick it off with your thumb nail like your popping the head off a daisy, after a couple of uses they free up real nice.
Also if you use your fingers to put the lids on be careful when your pushing down on it, if you’d dent the top of the capsule you end up with a void between the lid and the screen in the vape, this little void makes it possible for debris to escape the capsule as you inhale, it’ll clog up the screen over time.
I use a flat ended pencil to ream out the inside of any dented capsules and make them flat again.
The filling set comes with a special tool for putti the lids on, even if you don’t get the filling set then that little tool is worth getting just to keep your capsules in good condition

I don't think I'll bother with the capsules.
I like it better just with the reducer.
I'll just get spare screen's for the reducer. My hands are like JCB shovels and them capsules are far too fiddly I'm more than happy with just the reducer. Thanks mate

[Vador]

No worries, I misread the part that you aren’t fussed about the capsules so ignore me.

one word of advice, when cleaning it try not to remove the metal reducer from the orange plastic.
I took mine out only a handful of times for cleaning when one of the small plastic tabs that hold it in broke off, not log after that another broke then the last one, got to the point the reduced would just fall out, was sat there one day in shorts and tshirt having a vape, when finished I emptied it when the reduced fell out. Instant reaction is to try and stop it falling by catching it between my legs, yeah that was a bad move 200c piece of metal on bare legs is not a nice feeling lol

[Treetrunk]

No worries, I misread the part that you aren’t fussed about the capsules so ignore me.

one word of advice, when cleaning it try not to remove the metal reducer from the orange plastic.
I took mine out only a handful of times for cleaning when one of the small plastic tabs that hold it in broke off, not log after that another broke then the last one, got to the point the reduced would just fall out, was sat there one day in shorts and tshirt having a vape, when finished I emptied it when the reduced fell out. Instant reaction is to try and stop it falling by catching it between my legs, yeah that was a bad move 200c piece of metal on bare legs is not a nice feeling lol

I'll definitely bare that in mind
I'll order one as I'm bound to break it.

[FX]

Yeah, I've gone through a fair few of the orange holders lol...

[Vador]

Do you find the little clips break @FX?
Apart from them clips everything else seems to be holding up at the moment on mine.
Only time will tell though I guess

[FX]

The clips break so it's not held in tight and the handle snaps off lol, the rest of it seems to be pretty solid, I did have it kinda catch fire though lol.... The cable just inside the unit got worn from years of use, I just opened it up and removed the worn section of cable, works a treat again now...

[Vador]

I did wonder how long it’ll be before the handle breaks off, I try not to use it for that reason, I just grab it by the knobbly bits and twist

[FX]

I just grab it by the knobbly bits and twist