Colloidal silver and CS reversal

[GMO]

Hey Growroom

I was cooking up some colloidal silver and thought I'd bring yall along for the ride

Kit list:



Purified or deionised water
2 x Silver 99.9% pure rods
3 x 9v batteries
2 × Crocodile clip and cable (test wires)
Tds meter
Glass jar
A piece of card

Setup:

Peirce 2 holes in the card for the silver rods to go through



Connect 9v batteries together



Clip rod onto wires



Pop some water in the glass jar and check ppm/ub before starting (below is ub)



Now just pop the rods through the holes in the cardboard making sure they don't touch the sides other each other (closer the better tho)



Then just clip on the batteries and wait



Won't take long before you see bubbles



Around 3-5 mins in a lil plume



Around 15 mins



And after 45 mins the colour has obviously changed and the terminal and different colours



Ppm 21



Ub 42



Decant (just a poundland travel spray bottle)



And protect from light (I wrapped the bottle in black electrical tape. You could just use and amber glass bottle)



It'll be a good while before I actually put this stuff to the test but will keep you all posted

Thanks for following along

Sent from my SM-G900F using Tapatalk

[Wizard]

I think I’m gonna have to try this one out , just have to get some silver rods , does this method give you just female seed ? thanks for the tutorial


Sent from my iPhone using Tapatalk

[GMO]

Side note: ub/up work out to 1000th 1ec

1000ub =1.0ec on most cheap tds meters

Sent from my SM-G900F using Tapatalk

[Wizard]

Do you think I could use this if it is diluted as its 500ppm . 25 buck a bottle?



Bloody phone lmao

[GMO]

Do you think I could use this if it is diluted as its 500ppm . 25 buck a bottle?



Bloody phone lmao

I'm still yet try mine in all honesty

I've heard 25ppm + will do the job but with cs it also depends on particle size and if the particles are too large ie made too quickly then a high ppm won't fix it

If ya got 25 bucks and a plant you wanna try it on, there is one sure fire way to know if it works

Keep us up dated tho mate

Sent from my SM-G900F using Tapatalk

[Wizard]

Do you think I could use this if it is diluted as its 500ppm . 25 buck a bottle?



Bloody phone lmao

I'm still yet try mine in all honesty

I've heard 25ppm + will do the job but with cs it also depends on particle size and if the particles are too large ie made too quickly then a high ppm won't fix it

If ya got 25 bucks and a plant you wanna try it on, there is one sure fire way to know if it works

Keep us up dated tho mate

Sent from my SM-G900F using Tapatalk

I will update in here if I do give it a try


Bloody phone lmao

[Gone]

elo elo glad to see this made it to a thread bud im pulling up a chair for the ride atb

[Hobbit]

excellent post GMO. Very clear and great pics. In the past mate ive seen this done with only one battery, any reason behind 3. Is it quicker or finer particles, whats the scoop?

[GMO]

excellent post GMO. Very clear and great pics. In the past mate ive seen this done with only one battery, any reason behind 3. Is it quicker or finer particles, whats the scoop?

Thanks mate

From what I've read 3 is kinda the standard. Less will be smaller particles but any more will rush the process and potentially the particle would be too large

Other factors that may affect the particle size are light and temp. I'm not sure how they affect size but it's reason for natural variations even in off the shelf products



Sent from my SM-G950F using Tapatalk

[Grizzle]

Been looking to try this aswell so hoping to see how you guys get on. Got a few strains from mephisto genetics that have been limited runs / retired that i wanna try and preserve.