All seems to make sense to me.Egzoset wrote: βSat Oct 09, 2021 6:34 amHummm... Lets not require the services of a translator just yet!
IMO if you think the Vector KGM Volt might fail matching his Sticky Labs Co. vaporizer then pardon me for this criptic reference to a most basic principle:
Euh...
In any case please keep in mind that i only suggested my butane torch lighter was matching the consumption method fine, though perhaps i should have explained its blue flame only lasts 2 ~ 3 seconds at most, which is exactly why i used to carry 2 units in my vaporizer transport pouch (to alternate instead of over-heat):
The size is about 14.5 cm (L.) x 9.5 cm (W.) x 4.5 cm (H.) or ~620 cubic cm i guess... So i'll bet the Sticky Brick occupies more volume and also calls for something with "punch" like kitchen-size butane lighters - provided the flame can last as long as the associated ritual needs it to be, so this sort of "detail" is actually having some impact depending on how the lighter and tool happen to match together. My point being that an abused device won't be reliable the same as it would prove under normal operating conditions, provided it's got plenty of "juice" to do the job... And i consider the Volt targets cigarette users who only need to light up fast.
Moreover it turns out the Volt is already set near its maximum throttle limit and consequently half-full tanks rapidly cause performance to drop; in other words it requires frequent refills.
Sound familiar anyone? ...
On another hand, the leather pouch was sold with an electric razor inside, long long ago: it's refurbished. Nonetheless please take note everything necessary for a 1 week vacation is present in that picture, with a possibility to replace one lighter by a butane refill... Other than this i'd argue each toke costs about 100 joules, may 50, maybe 200. Not many times beyond that anyway.
Once again i'm curious about the Sticky Brick energy budget relatively to its toking density, opacity & volume, though in my pipe a particular configuration setup would help tame down a person's consuming profile most conveniently on the long run, ideally... But this is a bong-style setup seemingly inviting party-size tokes, so... On a Sticky Brick all parameters being fixed i suppose manual control over Fresh Air injection is Paramount, right?? After all the years the pinhole drag must have been tweaked to perfection, e.g. the ""inlet" port would affect performance in a major way compared to my VG pipe which can tolerate that path to get splitted between 1 manual port + 1 permanent one. Long story!
In any case our respective tools may happen to share multiple common features it doesn't imply there ain't a few differences - that i wish shall get discussed by the op himself if that ever applies at all, of course.
P.S.: Oh my! Have anyone noticed the emoticons started breeding exponentially?!!
Difference in temp change etc etc.....
Are you high yet? If not, try it!