DIY DWC bubbler cloner

[MrMan]

I made a small DWC bubbler so I thought I'd share how easy it is and that anyone can do it.

You will need:
Any small tub with a lid will do the job (I used a small 500ml bathroom dehumidifier.)
some small net-pots (i got mine from ebay 10 for £1 from China.)
Air pump and stone.
Root riot cubes.



Just cut some holes in the lid of your tub so you can put your net-pots in and a small hole for the air pump line mine already had holes which made it easier just had to make them a little bigger with some wire cutters.



Then cover the sides of your tub if its clear with duct tape to keep light out.

[Keeno]

Great little guide MrMan!

Nice and simple and cost effective.

[Clunge Muncher]

Nice and simple :).

[MrMan]

thanks lads were always looking at ways to save a little and this thing cost me piratically nothing the dehumidifier i robbed off my sister the airpump stones and airline i already had only thing i bought for this was the small netpots

[Clunge Muncher]

Every little helps dont it..

[KD]

So do you just take clones as normal then put them down in the water with the bubbler going yeah?