Welcome to the grow room designs and equipment section. Every grower faces different obstacles when setting up a cannabis grow room. Use this section to discuss the different types of grow rooms you use or would like information about to grow cannabis. To become part of our online cannabis growing community click here to register.

Lebensraum

Discuss setting up your space & what equipment to use
Post Reply
User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Lebensraum

Post by Nom »

Since I can't be growing in the spare room anymore and tents are pretty much a no no as well I'll be building myself a little cubby. The plan is to portion off a bit of the room with a plasterboard stud wall to create a space 190cm long x 80ish cm wide x 240cm high. This will be done inside a small box room with the rest of the room left intact so I wont be having curtains permanently closed (which drew suspicion from a nosey neighbour who started asking way too many questions).

I've got more than a few questions I'd like to put to the community regarding the build as I begin to gather materials, it'll be a little while before it's up and running and I'm going to take my time doing it.

Firstly its a south facing room gets the sun all day, should I be insulating it with kingspan or similiar?
These users thanked the author Nom for the post (total 4):
Greenfingers (Sun Jul 18, 2021 9:16 am) • Keeno (Sun Jul 18, 2021 11:06 am) • GMO (Sun Jul 18, 2021 11:51 am) • Inactive account (Sat Sep 04, 2021 8:21 am)

Greenfingers
Registered User
Posts: 2701
Joined: Tue Mar 17, 2020 7:53 pm
Has thanked: 3570 times
Been thanked: 2395 times
Status: Offline

Re: Lebensraum

Post by Greenfingers »

where you going to pull new air from and where you going to exhaust the old damp air to ?
These users thanked the author Greenfingers for the post (total 2):
Keeno (Sun Jul 18, 2021 11:18 am) • Nom (Sun Jul 18, 2021 11:46 am)

User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Re: Lebensraum

Post by Nom »

The space under the floorboards is 12 inches deep and runs straight to a vent which come out of the roof of the extension at the back of the house, so I was gonna pull air through there and exaust into another part of the house
These users thanked the author Nom for the post:
Keeno (Sun Jul 18, 2021 11:18 am)

User avatar
Greenfingers
Registered User
Posts: 2701
Joined: Tue Mar 17, 2020 7:53 pm
Has thanked: 3570 times
Been thanked: 2395 times
Status: Offline

Re: Lebensraum

Post by Greenfingers »

Nom wrote:
Sun Jul 18, 2021 10:35 am
The space under the floorboards is 12 inches deep and runs straight to a vent which come out of the roof of the extension at the back of the house, so I was gonna pull air through there and exaust into another part of the house
can you get to the chimney mate ? the air which comes out the groom is damp so i'd want it exiting the house.
These users thanked the author Greenfingers for the post (total 2):
Keeno (Sun Jul 18, 2021 11:18 am) • Nom (Sun Jul 18, 2021 11:46 am)

User avatar
Keeno
Registered User
Posts: 25547
Joined: Sat Oct 07, 2017 10:11 pm
Has thanked: 8242 times
Been thanked: 12990 times
Contact:
Status: Offline

Re: Lebensraum

Post by Keeno »

I'm with GF, it will be damp air. Can you not do it the other way round. Extracting air is always noisier than intake, so would be better to have a passive intake in the house and extract it out through the floor.

Tbh Nom if the room is in a house I don't see the need for the expense of Kingspan or Celotex. Unless this is a very hot room but even then that's more an air flow issue as I imagine the walls are brick?

If i was setting up in a normal household room id go for:

CLS C16 3x2 timer (nice and cheap stud wood) - https://www.selcobw.com/products/timber ... 2-nom-pefc
100-200mm earth-wool for insulation (not as itchy as rockwool) - https://www.diy.com/departments/knauf-e ... lsrc=aw.ds
Soundproof plasterboard - https://www.selcobw.com/gtec-db-board-t ... 0-x-12-5mm

Then either paint white or kine with mylar.
These users thanked the author Keeno for the post (total 2):
Nom (Sun Jul 18, 2021 11:46 am) • duke (Sat Sep 04, 2021 9:36 am)

User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Re: Lebensraum

Post by Nom »

I could deffinately do it the other way around with extraction but I've got two hopes of getting to a chimney and one of them's dead. The room does get pretty hot as its a terrace and the only brick walls are the ones seperating the house's the front and back walls are timber frame plasterboard/rockwool/felt/tile
These users thanked the author Nom for the post (total 2):
Keeno (Sun Jul 18, 2021 12:20 pm) • duke (Sat Sep 04, 2021 9:36 am)

User avatar
Keeno
Registered User
Posts: 25547
Joined: Sat Oct 07, 2017 10:11 pm
Has thanked: 8242 times
Been thanked: 12990 times
Contact:
Status: Offline

Re: Lebensraum

Post by Keeno »

Nom wrote:
Sun Jul 18, 2021 11:46 am
I could deffinately do it the other way around with extraction but I've got two hopes of getting to a chimney and one of them's dead. The room does get pretty hot as its a terrace and the only brick walls are the ones seperating the house's the front and back walls are timber frame plasterboard/rockwool/felt/tile
I see, yeah celotex it then mate, better safe than sorry. My loft build I went ott but saves stress later.
These users thanked the author Keeno for the post:
Nom (Sun Jul 18, 2021 2:08 pm)

User avatar
Marcus
Registered User
Posts: 5319
Joined: Thu Nov 29, 2018 2:25 pm
Has thanked: 2252 times
Been thanked: 4153 times
Status: Offline

Re: Lebensraum

Post by Marcus »

I vent into the same room with my tent. Never had any issues with 'wet air' or rot.

My tent is currently in the hottest room in the house, south facing, sun blaring at the window now. Room is at 28*C and the tent is at 31*C. I reckon it's the hottest day of the year today.

I personally would just use some 3x2 and then whack plasterboard on the outside, joint it and paint it. Make it look like a fitted wardrobe or something. :idn:

Celotex/kingspan is pricey at the moment, save the pennies for some posh wardrobe doors. :bye:
These users thanked the author Marcus for the post (total 4):
Keeno (Sun Jul 18, 2021 1:19 pm) • flip (Sun Jul 18, 2021 1:33 pm) • Nom (Sun Jul 18, 2021 2:08 pm) • Josh (Mon Jul 19, 2021 3:11 am)

User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Re: Lebensraum

Post by Nom »

Marcus wrote:
Sun Jul 18, 2021 1:03 pm
Make it look like a fitted wardrobe or something.
Thats me plan

I've still got 3 rolls of earthwool from the attic i haven't finished insulating yet, i can use that if it will do the job?

User avatar
MrNice
Registered User
Posts: 10709
Joined: Fri Apr 24, 2020 7:25 pm
Has thanked: 4883 times
Been thanked: 6212 times
Status: Offline

Re: Lebensraum

Post by MrNice »

Hey Nom

Bloody neighbours i hate them

"curtains permanently closed (which drew suspicion from a nosey neighbour who started asking way too many questions"

Should have said its a dark room for photography or if me depending on mood also may have said i worship devil up there and he dont like the light........lol

Just me LOL

MN
Image

Post Reply

Return to “Grow Room Designs & Equipment”