Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.

Jiffy Pellets

Get help fixing cannabis deficiencies and issues
Post Reply
User avatar
wutang
Registered User
Posts: 3301
Joined: Tue Aug 25, 2020 11:24 am
Has thanked: 1575 times
Been thanked: 1269 times
Status: Offline

Jiffy Pellets

Post by wutang »

Hey All

I know the jiffy pellets are a love or hate amongst us here.

I was wondering if there are people who use the pellets and put them under a light in a propagator as soon as they put the seed in. See my understanding is that they are in darkness when in the pellet about 1cm down and then covered, so as soon as they pop they have light right away.

I usually put the propagator in my airing cupboard but temps hit 26/27 in the dome..where as in my tent in the propagator they sit around 23/24c with a low powered led light.

Cheers
Wu

User avatar
GMO
Registered User
Posts: 10500
Joined: Sat Jun 02, 2018 2:44 pm
Has thanked: 4546 times
Been thanked: 3136 times
Contact:
Status: Offline

Re: Jiffy Pellets

Post by GMO »

yeah i keep the light on for consistent temp and also cos they could pop up any time and id sooner them see light when they do

just my opinion
These users thanked the author GMO for the post (total 2):
wutang (Thu May 06, 2021 11:20 am) • Wrh (Thu May 06, 2021 2:57 pm)
“If you can't explain it to a six year old, you don't understand it yourself.” -Albert Einstein

User avatar
wutang
Registered User
Posts: 3301
Joined: Tue Aug 25, 2020 11:24 am
Has thanked: 1575 times
Been thanked: 1269 times
Status: Offline

Re: Jiffy Pellets

Post by wutang »

GMO wrote:
Thu May 06, 2021 10:33 am
yeah i keep the light on for consistent temp and also cos they could pop up any time and id sooner them see light when they do

just my opinion
Thanks @GMO. fingers crossed this time I don't mess up

User avatar
wutang
Registered User
Posts: 3301
Joined: Tue Aug 25, 2020 11:24 am
Has thanked: 1575 times
Been thanked: 1269 times
Status: Offline

Re: Jiffy Pellets

Post by wutang »

@GMO what temps and humidity do you aim for when propagating?
These users thanked the author wutang for the post:
GMO (Thu May 06, 2021 3:08 pm)

User avatar
GMO
Registered User
Posts: 10500
Joined: Sat Jun 02, 2018 2:44 pm
Has thanked: 4546 times
Been thanked: 3136 times
Contact:
Status: Offline

Re: Jiffy Pellets

Post by GMO »

wutang wrote:
Thu May 06, 2021 2:58 pm
@GMO what temps and humidity do you aim for when propagating?
:idn: as long as ya raybans fog up when ya check em 8-)

warm and moist
These users thanked the author GMO for the post (total 2):
wutang (Thu May 06, 2021 3:16 pm) • MrNice (Thu May 06, 2021 3:22 pm)

Chongasnorth
Registered User
Posts: 2
Joined: Thu May 06, 2021 5:10 pm
Has thanked: 0
Been thanked: 2 times
Status: Offline

Re: Jiffy Pellets

Post by Chongasnorth »

I like to put them in the prop until they have surfaced then under a light, mainly to keep it from drying out accidentally.


Sent from my iPhone using Tapatalk
These users thanked the author Chongasnorth for the post:
wutang (Thu May 06, 2021 6:31 pm)

Chongasnorth
Registered User
Posts: 2
Joined: Thu May 06, 2021 5:10 pm
Has thanked: 0
Been thanked: 2 times
Status: Offline

Re: Jiffy Pellets

Post by Chongasnorth »

Prop in a cupboard under darkness until they surface then under the light, purely so they don’t dry out.


Sent from my iPhone using Tapatalk
These users thanked the author Chongasnorth for the post:
wutang (Thu May 06, 2021 6:31 pm)

User avatar
FX
Registered User
Posts: 2120
Joined: Wed Jun 24, 2020 8:41 pm
Location: Planet earth (unverified)
Has thanked: 1054 times
Been thanked: 960 times
Status: Offline

Re: Jiffy Pellets

Post by FX »

Image
Those have all popped after 4 days, I'm no expert for sure but seems to work. I mixed a little bit of biogrow and root juice then add 5ml of it to each pellet, pop a seed in then stand them up in a propogator under light, spraying water into the prop occasionally.
I soaked the seeds in water over night first...
These users thanked the author FX for the post:
wutang (Thu May 06, 2021 7:31 pm)

User avatar
Captain Beefheart
GR420 Leg End
Posts: 7571
Joined: Sat Nov 04, 2017 3:05 pm
Location: on a wet rock in the north sea
Has thanked: 2395 times
Been thanked: 3763 times
Contact:
Status: Offline

Re: Jiffy Pellets

Post by Captain Beefheart »

I myself use coco jiffys for taking cuttings for coco / water i soak them in a cf of 1 ph 6 then root them....if I was starting seeds I'd use the peat based ones as then the tap root has summit to chew on from birth, I buy them by the hundred, wutang my only advice is as soon as the seedling appears and its upright and has cotylons onnit get it out of the propagator otherwise ewe risk the seed damping off !!!! Good luck ImageImage

great googly moogly!

These users thanked the author Captain Beefheart for the post:
wutang (Thu May 06, 2021 7:31 pm)

User avatar
wutang
Registered User
Posts: 3301
Joined: Tue Aug 25, 2020 11:24 am
Has thanked: 1575 times
Been thanked: 1269 times
Status: Offline

Re: Jiffy Pellets

Post by wutang »

FX wrote:
Thu May 06, 2021 5:35 pm
Image
Those have all popped after 4 days, I'm no expert for sure but seems to work. I mixed a little bit of biogrow and root juice then add 5ml of it to each pellet, pop a seed in then stand them up in a propogator under light, spraying water into the prop occasionally.
I soaked the seeds in water over night first...
Hey dude..I saw you mentioned pellets in the forum chat so was going to ask your technique...well I did..sent you a message and it went into the ether..I have issues with messaging new people on here..replies are Ok..strange.

Thanks for sharing. I had success before in my NFT days...and it was easy..but recently not sure if its my seeds or environment that has given me a tough ride with pellets. A royal bluematic has gone in yesterday..23/24c and 99% humidity in the propagatoe right now.

Post Reply

Return to “Cannabis Issues And Questions”