Extraction mentor

Post Reply
User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Extraction mentor

Post by Nom »

Hi all ive decided to start turning 90% of my stuff into oil and im in serious need of an oil guru to guide me on my way. So far I've attempted one run with some trim but i dont think it went too well
These users thanked the author Nom for the post:
Minty (Mon Aug 31, 2020 1:24 am)

User avatar
Mini-G-Star
Registered User
Posts: 2099
Joined: Thu Sep 12, 2019 5:04 pm
Has thanked: 52 times
Been thanked: 278 times
Contact:
Status: Offline

Re: Extraction mentor

Post by Mini-G-Star »

Hey mate nook made some. Here is his diary if it helps

viewtopic.php?f=30&t=1172&p=18803&hilit=cancer#p18803
These users thanked the author Mini-G-Star for the post (total 2):
Minty (Mon Aug 31, 2020 1:24 am) • Nom (Mon Aug 31, 2020 5:54 am)
"It's not about how hard you can hit; it's about how hard you can get hit and keep moving forward."

User avatar
Minty
Registered User
Posts: 3893
Joined: Sat Apr 18, 2020 7:21 pm
Has thanked: 3802 times
Been thanked: 1494 times
Status: Offline

Re: Extraction mentor

Post by Minty »

Mini-G-Star wrote:
Sun Aug 30, 2020 10:08 pm
Hey mate nook made some. Here is his diary if it helps

Anyone else? Anyone... Only, joking I love me some Nookie - thanks Mini ;o)
These users thanked the author Minty for the post (total 2):
Nom (Mon Aug 31, 2020 5:55 am) • Mini-G-Star (Mon Aug 31, 2020 8:10 am)

User avatar
Wizard
Registered User
Posts: 5902
Joined: Thu Jun 14, 2018 10:43 pm
Location: Canada Eh
Has thanked: 641 times
Been thanked: 976 times
Contact:
Status: Offline

Re: Extraction mentor

Post by Wizard »

I’ve made plenty of oil , what kind of direction ya need
These users thanked the author Wizard for the post (total 2):
Nom (Mon Aug 31, 2020 5:55 am) • Minty (Tue Sep 22, 2020 7:51 am)
We can get swept away by our thoughts,,or learn to step back and see them with clarity.
Easy to forget its a choice

User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Re: Extraction mentor

Post by Nom »

Well when we tried to make it we used a rice cooker.
So we didnt decarb first, made the mix, strained it and then into the rice cooker on the cook setting. We filled it right up and let the iso evaporate off, this happened in a hour or so. At no point did it bubble until there was very little volume left, is that right? Because i was under the impression it should be bubbling the whole time. When there was about an inch left we added a few drops of water and continued to reduce it down. When it started to bubble it really stank of hash/weed, my mate provided a thermometer which didnt work so i cant say how hot it all got but the rice cooker ranges between 100 and 110c. When it was really nice and thick and oil looking we took a bit in a pin and put a flame too it, it didnt immediately ignite the oil but did so eventually if you held it there, so can i assume no iso is left? Afterwards we didint know if it had decarbed so we put the oil in the oven at 120c for 30 mins to make sure. Its in a couple if syringes now and we got maybe 3ml of oil from 62g of trim. My additional questions are -
How do i make sure no iso is left in the oil?
Is the oil i made ruined?
Was my method floored?
I thought it woukd take alot longer, should it have?
Would a different method be better in the future?

I did alot of research before this was attempted but found alot of conflicting information. Before I start turning all my bud into oil i need to get it right. My aim is to stop smoking as much as possible and to just use the oil to get me there.
These users thanked the author Nom for the post:
Minty (Tue Sep 22, 2020 7:52 am)

User avatar
Nom
Registered User
Posts: 1826
Joined: Sun Nov 10, 2019 10:31 am
Location: Narnia
Has thanked: 635 times
Been thanked: 966 times
Status: Offline

Re: Extraction mentor

Post by Nom »

Any oil tycoons around :idn:

User avatar
Minty
Registered User
Posts: 3893
Joined: Sat Apr 18, 2020 7:21 pm
Has thanked: 3802 times
Been thanked: 1494 times
Status: Offline

Re: Extraction mentor

Post by Minty »

Nomoli wrote:
Wed Sep 02, 2020 6:09 am
Any oil tycoons around
@Keeno mentioned doing a tutorial.

*edit* but that might be for Bubble Hash - but he's a talented guy so we will just get him to do both.

User avatar
bigbadbillybob
Registered User
Posts: 1012
Joined: Wed Dec 12, 2018 12:45 pm
Has thanked: 182 times
Been thanked: 648 times
Contact:
Status: Offline

Re: Extraction mentor

Post by bigbadbillybob »

jeff ditchfield has the best instructional video on making oil for cancer that i have seen, its on yootioob, worth a look.
you will have to shell out on some specific gear, but it sounds like you are in it for the long run so it shouldnt be an issue.

and also note that his extractor hood is medical grade, if yours is the kitchen cooker, its possible that it can ignite the fumes, unless you are careful.
its worth a look.
These users thanked the author bigbadbillybob for the post:
Nom (Thu Sep 24, 2020 7:08 pm)

User avatar
Elias
Registered User
Posts: 86
Joined: Sat Jul 25, 2020 8:09 pm
Has thanked: 36 times
Been thanked: 73 times
Status: Offline

Re: Extraction mentor

Post by Elias »

How I make my oil...

Decarb first
Freeze the weed, ISO, funnels, jars the lot for at least 12 hours
2x quick washes. Mix with a fork for 30 seconds and let sit for 3 mins total.
Run it through cheese cloth then filter with coffee filters. Filter in the freezer if possible.
Once completed I use a double boiler. A flat bottom wok and sauce pan
Boiling water in the wok, saucepan on top and pour in small amounts and boil off. I use an electric camping stove. No naked flames! Don’t use your kitchen extraction and have plenty of ventilation.

I use 99.9% food grade ISO. Food grade doesn’t mean it’s safe for consumption!

User avatar
Greenfingers
Registered User
Posts: 2701
Joined: Tue Mar 17, 2020 7:53 pm
Has thanked: 3570 times
Been thanked: 2395 times
Status: Offline

Re: Extraction mentor

Post by Greenfingers »

These users thanked the author Greenfingers for the post:
JJ (Sat Sep 26, 2020 2:26 pm)

Post Reply

Return to “Cannabis Concentrates, Edibles, Extracts & Paraphernalia”