Minty wrote: ↑Sat Jun 20, 2020 12:58 amYour all good mate - they are the perfect way around - if you have any questions mate just shout but as long as you get the first bit right in terms of the 240v side (is that bit clear enough? otherwise you will need an Aspie Suit for that part mate) - the LED side 30volt is not going to break your diodes or anything (just don't like it - as a side note if this had been constant voltage / parallel wiring then that can kill the diodies) but your fine - you can stick a screwdriver in that little plastic plug hole (after removing it) and dim the Mhz down from 2100mhz to 1600mhz or someshit and it does make a difference but it is certainly not the same as the new driver I just got which is a type A/B so does constant current / constant voltage / and 3 way dimming all in one for a couple of quid more than the basic A (constant current) or B (constant voltage) - just a good tip for anyone looking at buying an LED driver especially a good quality Mean Well driver - the only downside is that the AB types are not as widely available.captain beefheart wrote: ↑Sat Jun 20, 2020 12:39 amA screwdriver and me usually means spare parts
Great Googly Moogly
dim it befooked i`ll have the fuka flat out please .... no chance
polly still aint emptied my chamber yet so it mite be Monday now or Tuesday looking at it 
she`s kind of slowed up like. i`ll be back + aspie at least i wont cut through my lead with a shears 
so ye it's very bright 
I'll hang it over some dope plants tomorrow 
Discord
Links