Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.

Adding npk values

Get help fixing cannabis deficiencies and issues
User avatar
weedabix
Registered User
Posts: 475
Joined: Mon Dec 02, 2019 9:12 am
Has thanked: 148 times
Been thanked: 123 times
Contact:
Status: Offline

Re: Adding npk values

Post by weedabix »

I think the main issue are the gallons. If you want actual npk values of your solution, you will have to use a decimal system, otherwise you're screwed as the npk values are given in percent. The ratios will remain the same whether you mix it with a gallon or a litre.
The numbers you'd get would be really small! I might have made some mistake but they are very low values. You can think of it as of beer. If you have a beer with 5% alcohol, it's like the N value of the Micro, so if you take 2.5ml of beer and add it to one gallon of water, it will be very light beer. I made a little spreadsheet, so you can calculate actual N-P-K values of the diluted solution and of the mix of fertiliser. I'll try to find a way to get that online somehow.

Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 1893 times
Been thanked: 867 times
Contact:
Status: Offline

Re: Adding npk values

Post by Josh »

weedabix wrote:I think the main issue are the gallons. If you want actual npk values of your solution, you will have to use a decimal system, otherwise you're screwed as the npk values are given in percent. The ratios will remain the same whether you mix it with a gallon or a litre.
The numbers you'd get would be really small! I might have made some mistake but they are very low values. You can think of it as of beer. If you have a beer with 5% alcohol, it's like the N value of the Micro, so if you take 2.5ml of beer and add it to one gallon of water, it will be very light beer. I made a little spreadsheet, so you can calculate actual N-P-K values of the diluted solution and of the mix of fertiliser. I'll try to find a way to get that online somehow.
Thanks man, I'd appreciate that

Sent from my LGMP260 using Tapatalk


User avatar
Captain Beefheart
GR420 Leg End
Posts: 7571
Joined: Sat Nov 04, 2017 3:05 pm
Location: on a wet rock in the north sea
Has thanked: 2395 times
Been thanked: 3763 times
Contact:
Status: Offline

Re: Adding npk values

Post by Captain Beefheart »

We growing dope mun not trying to bump start the hadron colider . Fukin hell

Great Googly Moogly


User avatar
seymore_budz
Registered User
Posts: 2389
Joined: Mon Sep 09, 2019 7:18 pm
Has thanked: 619 times
Been thanked: 1448 times
Contact:
Status: Offline

Re: Adding npk values

Post by seymore_budz »

Those who can make you believe absurdities can make you commit atrocities.

User avatar
weedabix
Registered User
Posts: 475
Joined: Mon Dec 02, 2019 9:12 am
Has thanked: 148 times
Been thanked: 123 times
Contact:
Status: Offline

Re: Adding npk values

Post by weedabix »


User avatar
weedabix
Registered User
Posts: 475
Joined: Mon Dec 02, 2019 9:12 am
Has thanked: 148 times
Been thanked: 123 times
Contact:
Status: Offline

Re: Adding npk values

Post by weedabix »

This might work maybe?

User avatar
weedabix
Registered User
Posts: 475
Joined: Mon Dec 02, 2019 9:12 am
Has thanked: 148 times
Been thanked: 123 times
Contact:
Status: Offline

Re: Adding npk values

Post by weedabix »

you can fill in everything yellow and it'll spit out red values

User avatar
weedabix
Registered User
Posts: 475
Joined: Mon Dec 02, 2019 9:12 am
Has thanked: 148 times
Been thanked: 123 times
Contact:
Status: Offline

Re: Adding npk values

Post by weedabix »

I won't take any responsibility for the numbers being correct - so maybe still stick your ec-meter in there before you burn the plants.

User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 1893 times
Been thanked: 867 times
Contact:
Status: Offline

Re: Adding npk values

Post by Josh »

captain beefheart wrote:We growing dope mun not trying to bump start the hadron colider . Fukin hell

Great Googly Moogly
I'm just tryin to make my own nutes cap growing for a year on 5$ worth of salts sounds good to me

Sent from my LGMP260 using Tapatalk


User avatar
Josh
GR420 Leg End
Posts: 3827
Joined: Sat Jun 30, 2018 10:32 pm
Has thanked: 1893 times
Been thanked: 867 times
Contact:
Status: Offline

Re: Adding npk values

Post by Josh »

Thank you bro, that total npk value is what I was interested in
Appreciate the help

Sent from my LGMP260 using Tapatalk


Post Reply

Return to “Cannabis Issues And Questions”