Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.
Remote locating LED drivers
- Grumpy Toad
- Registered User
- Posts: 3165
- Joined: Mon Mar 15, 2021 5:36 pm
- Location: Sacramento, CA, USA
- Has thanked: 1382 times
- Been thanked: 2693 times
- Status: Offline
Remote locating LED drivers
I'm considering my 4' x 4' tent space for next run. I'm wondering about moving the LED drivers to outside my tent to keep temps down. I have a HLG 260 watt and two HLG 135 watt lights. HLG recommends using a heat sink if you move the drivers. They have a heat sink for $35.00 US that would work.
My question is: Has anyone done this? Was it worth the time and money? At this time I can't run my lights at full because of temperature. I can run at 400 watts if the weather is favorable, 300 watts if we are having a heat wave. I know I can run my schedule to take advantage of cooler times of day. But I like the convenience of having lights on during daylight hours. I have my desk, computer, guitars and amps etc in the lung room.
I'm not looking to reinvent the wheel. Just continually tweaking my grow to be as stable and efficient as possible.
My question is: Has anyone done this? Was it worth the time and money? At this time I can't run my lights at full because of temperature. I can run at 400 watts if the weather is favorable, 300 watts if we are having a heat wave. I know I can run my schedule to take advantage of cooler times of day. But I like the convenience of having lights on during daylight hours. I have my desk, computer, guitars and amps etc in the lung room.
I'm not looking to reinvent the wheel. Just continually tweaking my grow to be as stable and efficient as possible.
- These users thanked the author Grumpy Toad for the post (total 3):
- anova.330 (Fri Dec 01, 2023 9:49 pm) • camkush (Sat Dec 02, 2023 1:41 am) • biosynthetic (Sat Dec 02, 2023 2:29 pm)
Birthplace: Earth
Race: Human
Politics: Freedom
Religion: Love
Wabi-Sabi Garden
Race: Human
Politics: Freedom
Religion: Love
Wabi-Sabi Garden
- Marcus
- Registered User
- Posts: 5319
- Joined: Thu Nov 29, 2018 2:25 pm
- Has thanked: 2252 times
- Been thanked: 4153 times
- Status: Offline
Re: Remote locating LED drivers
I ran my led driver on a shelf above the lights, I never thought it would need a heat sink. It doesn’t get that warm.
I just extended it with some 1mm cable if that helps?
I just extended it with some 1mm cable if that helps?
- These users thanked the author Marcus for the post (total 3):
- anova.330 (Fri Dec 01, 2023 10:00 pm) • Grumpy Toad (Fri Dec 01, 2023 10:39 pm) • 2-Scoops (Sat Dec 02, 2023 2:16 pm)
- anova.330
- Registered User
- Posts: 2662
- Joined: Mon Nov 30, 2020 4:28 pm
- Has thanked: 3163 times
- Been thanked: 1189 times
- Status: Offline
Re: Remote locating LED drivers
Grumpy I have never done this, but it makes sense to move the drivers away from the boards in a cooler spot if you can find the right cables, of course, at the right length.
And the added expense of a heat sink is a necessity – – your board is acting as a heat sink as long as the driver is fastened to it.
If you had say some aluminum sheet that you could fasten to say, three-quarter inch particleboard, and post it on the wall, that would act as a heat sink you could fasten the drivers to.
Or, of course, you could upgrade your lights to a single light with 1000 W output… Somehow you have to measure that in relation to what you’re gaining by putting this amount of work in…
And the added expense of a heat sink is a necessity – – your board is acting as a heat sink as long as the driver is fastened to it.
If you had say some aluminum sheet that you could fasten to say, three-quarter inch particleboard, and post it on the wall, that would act as a heat sink you could fasten the drivers to.
Or, of course, you could upgrade your lights to a single light with 1000 W output… Somehow you have to measure that in relation to what you’re gaining by putting this amount of work in…
- These users thanked the author anova.330 for the post (total 2):
- Grumpy Toad (Fri Dec 01, 2023 10:39 pm) • 2-Scoops (Sun Dec 03, 2023 1:55 pm)
#growingwitheagle #crystals #petioles #eagleproudwarriortheproject #weednerdworld
#potectDiscord
#potectDiscord
- Treetrunk
- Registered User
- Posts: 3300
- Joined: Fri Jul 03, 2020 4:45 pm
- Has thanked: 1897 times
- Been thanked: 2359 times
- Status: Offline
Re: Remote locating LED drivers
If you have enough cable sure you can remove the driver. You'll be removing the driver from a heat source so why would you need a heatsink?
I always run my driver's remote. Even when I keep them in the tent for heat.
You'll be doing the board and driver a favour as they'll both run cooler.
I always run my driver's remote. Even when I keep them in the tent for heat.
You'll be doing the board and driver a favour as they'll both run cooler.
- These users thanked the author Treetrunk for the post (total 3):
- Grumpy Toad (Fri Dec 01, 2023 10:54 pm) • anova.330 (Sat Dec 02, 2023 3:12 am) • 2-Scoops (Sat Dec 02, 2023 2:18 pm)
- camkush
- GR420 Moobs Of The Year
- Posts: 4451
- Joined: Tue Oct 31, 2017 4:56 pm
- Location: Pluto
- Has thanked: 1623 times
- Been thanked: 2150 times
- Status: Offline
Re: Remote locating LED drivers
This is way beyond me, but I love the idea and would enjoy talking to you about this some once you get it figured out
- These users thanked the author camkush for the post (total 2):
- anova.330 (Sat Dec 02, 2023 3:11 am) • Grumpy Toad (Sat Dec 02, 2023 6:13 pm)
#5
Roll Tide
#ProtectDiscord
Roll Tide
#ProtectDiscord
- biosynthetic
- Registered User
- Posts: 2445
- Joined: Tue Jun 22, 2021 3:23 pm
- Has thanked: 3905 times
- Been thanked: 1417 times
- Contact:
- Status: Offline
Re: Remote locating LED drivers
I've got some old purple LED's, thought about taking out one of the heatsinks and using them for this purpose in the summer. Might test it out on the F-bar cheers
- These users thanked the author biosynthetic for the post:
- Grumpy Toad (Sat Dec 02, 2023 6:12 pm)
- 2-Scoops
- Registered User
- Posts: 6235
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 3641 times
- Been thanked: 3518 times
- Status: Offline
Re: Remote locating LED drivers
Kind of splitting two different heat sources that are working as one hotter heat source whilst joined together and in doing so slightly lowering temps of both ?
Iff that's case possibly just splitting them alone even if both heat sources were left in the tent may also drop temps in their slightly, feck knows but its possible that it would or should do. In my head it does anyhow. But i would think it should drop them a little more if driver was removed from tent too yes.
- These users thanked the author 2-Scoops for the post (total 2):
- Treetrunk (Sat Dec 02, 2023 2:57 pm) • Grumpy Toad (Sat Dec 02, 2023 6:12 pm)
"But your still looking at me that same damn way............ Like i just shit in your scrambled eggs" > Negan, Walking Dead
- Treetrunk
- Registered User
- Posts: 3300
- Joined: Fri Jul 03, 2020 4:45 pm
- Has thanked: 1897 times
- Been thanked: 2359 times
- Status: Offline
Re: Remote locating LED drivers
I only leave the driver in the tent during winter for a bit of extra heat.2-Scoops wrote: ↑Sat Dec 02, 2023 2:41 pmKind of splitting two different heat sources that are working as one hotter heat source whilst joined together and in doing so slightly lowering temps of both ?
Iff that's case possibly just splitting them alone even if both heat sources were left in the tent may also drop temps in their slightly, feck knows but its possible that it would or should do. In my head it does anyhow. But i would think it should drop them a little more if driver was removed from tent too yes.
In the summer I hang the drivers on hooks in the ceiling above the tent. I just thought it better to get air around the drivers in the hot months.
With these frosty nights at the moment I'm glad I got a CMH.
- These users thanked the author Treetrunk for the post (total 2):
- 2-Scoops (Sat Dec 02, 2023 3:08 pm) • Grumpy Toad (Sat Dec 02, 2023 6:12 pm)
- 2-Scoops
- Registered User
- Posts: 6235
- Joined: Mon Nov 26, 2018 2:10 pm
- Location: Not far away but far enough
- Has thanked: 3641 times
- Been thanked: 3518 times
- Status: Offline
Re: Remote locating LED drivers
Yes man it saves a fortune not having to run led and leccy heater at same time. That said it still cost a bloody fortune to run, well to me it does anyhow. Cheers mate.
- These users thanked the author 2-Scoops for the post:
- Grumpy Toad (Sat Dec 02, 2023 6:12 pm)
- Treetrunk
- Registered User
- Posts: 3300
- Joined: Fri Jul 03, 2020 4:45 pm
- Has thanked: 1897 times
- Been thanked: 2359 times
- Status: Offline
Re: Remote locating LED drivers
Gotta keep the climate grifters happy
- These users thanked the author Treetrunk for the post:
- Grumpy Toad (Sat Dec 02, 2023 6:12 pm)