Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.

Solid (non-flexi) water tanks

Get help fixing cannabis deficiencies and issues
Post Reply
User avatar
sybarite
Registered User
Posts: 1500
Joined: Fri Feb 28, 2020 7:30 pm
Location: iamnowhere
Has thanked: 1845 times
Been thanked: 1151 times
Status: Offline

Solid (non-flexi) water tanks

Post by sybarite »

Hello GR420, maybe you can help me. I need a 100L solid tank for nutrient solution with a fairly small footprint (50 cm or less) so I can go away for more than 3 days, ideally one that's easy to get my hands in and clean or position pumps/heaters, etc. I don't like or trust flexi-tanks so must be solid plastic. Square would be better than round due to the tight space it needs to fit in, but round would be fine if diameter is no bigger than 50cm. Was looking at cheap water butts from Wickes but they're a bit tall to reach into and have small bases with rounded corners, so might not be great for placing tank heaters. This one would be ideal if the lid was bigger or could lift it off: https://www.tanks-direct.co.uk/105-litr ... ower/p5993,but seems anything bigger than 50L with an open top needs side-support, like setting it into concrete or building a frame around it but haven't got space for that.

:thanks:

User avatar
Hmr81
Registered User
Posts: 1243
Joined: Wed Mar 17, 2021 3:22 pm
Has thanked: 330 times
Been thanked: 865 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by Hmr81 »

what about an autopot tank? they come in 50L though, not sure if theres a 100L one.
These users thanked the author Hmr81 for the post:
sybarite (Mon Mar 27, 2023 2:24 pm)
From the Garage of HMR
No Current Grow on, Point5 has the tent and is doing her lovely thing.

User avatar
Hmr81
Registered User
Posts: 1243
Joined: Wed Mar 17, 2021 3:22 pm
Has thanked: 330 times
Been thanked: 865 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by Hmr81 »

this one is 55cm diameter so might not work if 50 is total limit https://www.onlinetankstore.co.uk/produ ... ented-lid/
These users thanked the author Hmr81 for the post:
sybarite (Mon Mar 27, 2023 2:25 pm)

User avatar
Herbalist
Bud Of The Year Winner 2022
Posts: 2890
Joined: Sat Jan 22, 2022 4:21 pm
Has thanked: 2996 times
Been thanked: 1727 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by Herbalist »

Fill your bath and run some hose :idn: could you not cut a bigger access flap in the top of the one you linked?
These users thanked the author Herbalist for the post:
sybarite (Mon Mar 27, 2023 2:25 pm)
Making plans with a stoner is like being with a prostitute. They tell you they’re coming, but you know it’s a lie.

User avatar
Hmr81
Registered User
Posts: 1243
Joined: Wed Mar 17, 2021 3:22 pm
Has thanked: 330 times
Been thanked: 865 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by Hmr81 »

these arent cheap but would this work https://www.tanks-direct.co.uk/nestable ... 00l/p45451
These users thanked the author Hmr81 for the post:
sybarite (Mon Mar 27, 2023 2:25 pm)

User avatar
Cave Hill Cole
Registered User
Posts: 958
Joined: Thu Aug 13, 2020 2:30 am
Has thanked: 1198 times
Been thanked: 1241 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by Cave Hill Cole »

This is what I use, but not sure if you get them in your neck of the woods https://mazeproducts.com.au/product-cat ... minitanks/
These users thanked the author Cave Hill Cole for the post:
sybarite (Mon Mar 27, 2023 2:26 pm)
Weed will get me through times of no money, better than money will get me through times of no weed - Robert Sabbag, Smoke Screen

User avatar
Vador
Registered User
Posts: 2580
Joined: Thu Sep 30, 2021 10:47 pm
Has thanked: 916 times
Been thanked: 1209 times
Contact:
Status: Offline

Re: Solid (non-flexi) water tanks

Post by Vador »

What about potable water tanks, they use bsp threads so can easily plumb in any size fitting
https://www.tanks-direct.co.uk/water-ta ... itres/c959
These users thanked the author Vador for the post:
sybarite (Mon Mar 27, 2023 2:26 pm)
░█▒█▒▄▀▄░█▀▄░▄▀▄▒█▀▄
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄


Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.

User avatar
sybarite
Registered User
Posts: 1500
Joined: Fri Feb 28, 2020 7:30 pm
Location: iamnowhere
Has thanked: 1845 times
Been thanked: 1151 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by sybarite »

Hmr81 wrote:
Fri Mar 24, 2023 9:01 am
what about an autopot tank? they come in 50L though, not sure if theres a 100L one.
Thanks @Hmr81, I already have that and it's an excellent tank but I need something bigger. That will only last about 3 days, so 100L+ should be big enough for me to go away for a week. If I could get a 100L version of that it would be perfect, but I think anything more than 50L with that open top design will struggle to hold water without bulging out a lot - mine already bulges when full.

User avatar
sybarite
Registered User
Posts: 1500
Joined: Fri Feb 28, 2020 7:30 pm
Location: iamnowhere
Has thanked: 1845 times
Been thanked: 1151 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by sybarite »

Hmr81 wrote:
Fri Mar 24, 2023 9:06 am
this one is 55cm diameter so might not work if 50 is total limit https://www.onlinetankstore.co.uk/produ ... ented-lid/
Could be good, I like that the lid is 8", better than 6" but yeah, maybe a little big. It's worth considering if I can't find a smaller one, thanks.

User avatar
sybarite
Registered User
Posts: 1500
Joined: Fri Feb 28, 2020 7:30 pm
Location: iamnowhere
Has thanked: 1845 times
Been thanked: 1151 times
Status: Offline

Re: Solid (non-flexi) water tanks

Post by sybarite »

Herbalist wrote:
Fri Mar 24, 2023 9:07 am
Fill your bath and run some hose :idn: could you not cut a bigger access flap in the top of the one you linked?
I had not considered the bath idea, good one, but the bath is needed for drainage - I use a puddle pump from my run-off tank to the bath.

Cutting a flap could be good. I didn't want to ruin the integrity of the tank but just a square cut out of the top leaving all corners in tact could work.

:thanks:
These users thanked the author sybarite for the post:
Herbalist (Mon Mar 27, 2023 5:43 pm)

Post Reply

Return to “Cannabis Issues And Questions”