Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.

F.I.M. (F**k it, I missed)

Get help fixing cannabis deficiencies and issues
Raziel40
Registered User
Posts: 37
Joined: Tue Apr 04, 2023 7:07 pm
Has thanked: 18 times
Been thanked: 32 times
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Raziel40 »

Rawreefer wrote:
Thu Apr 13, 2023 9:24 pm
I would have responded but i feel my skills are only mediocre.....lol
No offenses meant to any.

Point 5
Registered User
Posts: 3757
Joined: Mon Dec 02, 2019 9:19 pm
Location: UK
Has thanked: 318 times
Been thanked: 1876 times
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Point 5 »

Topping isn't difficult. Let the plant grow to 5 nodes. Count up 3 nodes and there should be a bigger space to get some little snips in then just cut.

Image
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Image
Then as the plant grows I try to get them to grow away from each other.
These users thanked the author Point 5 for the post:
Raziel40 (Tue Apr 18, 2023 4:09 am)
Whoever said the best things in life are free blatantly grew their own pot
:puff puff:

Raziel40
Registered User
Posts: 37
Joined: Tue Apr 04, 2023 7:07 pm
Has thanked: 18 times
Been thanked: 32 times
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Raziel40 »

Point 5 wrote:
Sun Apr 16, 2023 1:31 pm
Topping isn't difficult. Let the plant grow to 5 nodes. Count up 3 nodes and there should be a bigger space to get some little snips in then just cut.

Image
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Image
Then as the plant grows I try to get them to grow away from each other.
Well demonstrated. Thank you. How you have them bent down so far is what I'm going to have to do with mine soon. I appreciate this post.

User avatar
camkush
GR420 Moobs Of The Year
Posts: 4451
Joined: Tue Oct 31, 2017 4:56 pm
Location: Pluto
Has thanked: 1623 times
Been thanked: 2150 times
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by camkush »

I get that this may be your first plant and you are skeptical to doing anything you could maybe deem as “wrong”… however at the end of the day this plant is a weed and a damn strong resilient one. Stress early on for a plant is good! Those Terps love stress within a certain amount. Don’t overthink the little things
These users thanked the author camkush for the post (total 6):
Sage (Tue Apr 18, 2023 5:41 am) • Herbalist (Tue Apr 18, 2023 9:29 am) • Cave Hill Cole (Tue Apr 18, 2023 10:34 am) • Vador (Tue Apr 18, 2023 2:43 pm) • Raziel40 (Tue Apr 18, 2023 5:57 pm) • anova.330 (Sat Apr 22, 2023 1:25 pm)
#5
Roll Tide :barmy:
#ProtectDiscord

User avatar
Vador
Registered User
Posts: 2580
Joined: Thu Sep 30, 2021 10:47 pm
Has thanked: 916 times
Been thanked: 1211 times
Contact:
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Vador »

Raziel40 wrote:
Tue Apr 18, 2023 4:11 am
How you have them bent down so far
You can crush the stems between your fingers and then point them in whatever direction you want, you can do it from a young age but be aware young plants need only a gentle squeeze till you start to feel it crunch. Older plants need more pressure but are easier to do without messing it up, pliers can be used on thicker stems.

To get a plant to bush out instead of grow straight up i like to go around all the stems as close to the main branch and crush them, then just point the branch out more and leave it, itll repair itself in no time. Then a few weeks later do the same but further up the stem.

Like cam said though dont over think it, for your first grows you should be concentrating on learning your plants and the signs that they will give you if something is wrong. Learn to grow healthy plants and how to read your plants and everything will make much more sense.

Good luck and don’t over complicate it, keep it simple
These users thanked the author Vador for the post (total 3):
camkush (Tue Apr 18, 2023 4:24 pm) • Raziel40 (Tue Apr 18, 2023 5:58 pm) • 2-Scoops (Tue Apr 18, 2023 7:52 pm)
░█▒█▒▄▀▄░█▀▄░▄▀▄▒█▀▄
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄


Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.

User avatar
Point 5
Registered User
Posts: 3757
Joined: Mon Dec 02, 2019 9:19 pm
Location: UK
Has thanked: 318 times
Been thanked: 1876 times
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Point 5 »

Raziel40 wrote:
Tue Apr 18, 2023 4:11 am
Point 5 wrote:
Sun Apr 16, 2023 1:31 pm
Topping isn't difficult. Let the plant grow to 5 nodes. Count up 3 nodes and there should be a bigger space to get some little snips in then just cut.

Image
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Image
Then as the plant grows I try to get them to grow away from each other.
Well demonstrated. Thank you. How you have them bent down so far is what I'm going to have to do with mine soon. I appreciate this post.
I use the siftte green wire and slowly Iver a week pull then down 8f that makes sense it's not done in one go. I've pulled to hard before and split plant down the middle and she survived some how. These plants are up for a bit of abuse

User avatar
Keeno
Registered User
Posts: 25547
Joined: Sat Oct 07, 2017 10:11 pm
Has thanked: 8242 times
Been thanked: 12990 times
Contact:
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Keeno »

viewtopic.php?f=6&t=4419&p=92682&hilit=Topping#p92682

Here's a guide I done to topping a while back. Has so close up pictures of where to top.
These users thanked the author Keeno for the post:
Raziel40 (Wed Apr 26, 2023 2:15 pm)

User avatar
Keeno
Registered User
Posts: 25547
Joined: Sat Oct 07, 2017 10:11 pm
Has thanked: 8242 times
Been thanked: 12990 times
Contact:
Status: Offline

Re: F.I.M. (F**k it, I missed)

Post by Keeno »

LST guide in the following link. I find topping and some LST a real nice combination.

viewtopic.php?f=6&t=4340&p=91333&hilit=Lst#p91333
These users thanked the author Keeno for the post:
Raziel40 (Wed Apr 26, 2023 2:16 pm)

Post Reply

Return to “Cannabis Issues And Questions”