No offenses meant to any.
Welcome to the cannabis growing issues and help section. Use this section to ask about issues, deficiencies and other problems you encounter while growing cannabis. To become part of our online cannabis growing community click here to register.
F.I.M. (F**k it, I missed)
- Point 5
- Registered User
- Posts: 3757
- Joined: Mon Dec 02, 2019 9:19 pm
- Location: UK
- Has thanked: 318 times
- Been thanked: 1876 times
- Status: Offline
Re: F.I.M. (F**k it, I missed)
Topping isn't difficult. Let the plant grow to 5 nodes. Count up 3 nodes and there should be a bigger space to get some little snips in then just cut.
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Then as the plant grows I try to get them to grow away from each other.
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Then as the plant grows I try to get them to grow away from each other.
Whoever said the best things in life are free blatantly grew their own pot
-
- Registered User
- Posts: 37
- Joined: Tue Apr 04, 2023 7:07 pm
- Has thanked: 18 times
- Been thanked: 32 times
- Status: Offline
Re: F.I.M. (F**k it, I missed)
Well demonstrated. Thank you. How you have them bent down so far is what I'm going to have to do with mine soon. I appreciate this post.Point 5 wrote: ↑Sun Apr 16, 2023 1:31 pmTopping isn't difficult. Let the plant grow to 5 nodes. Count up 3 nodes and there should be a bigger space to get some little snips in then just cut.
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Then as the plant grows I try to get them to grow away from each other.
- camkush
- GR420 Moobs Of The Year
- Posts: 4451
- Joined: Tue Oct 31, 2017 4:56 pm
- Location: Pluto
- Has thanked: 1623 times
- Been thanked: 2150 times
- Status: Offline
Re: F.I.M. (F**k it, I missed)
I get that this may be your first plant and you are skeptical to doing anything you could maybe deem as “wrong”… however at the end of the day this plant is a weed and a damn strong resilient one. Stress early on for a plant is good! Those Terps love stress within a certain amount. Don’t overthink the little things
#5
Roll Tide
#ProtectDiscord
Roll Tide
#ProtectDiscord
- Vador
- Registered User
- Posts: 2580
- Joined: Thu Sep 30, 2021 10:47 pm
- Has thanked: 916 times
- Been thanked: 1211 times
- Contact:
- Status: Offline
Re: F.I.M. (F**k it, I missed)
You can crush the stems between your fingers and then point them in whatever direction you want, you can do it from a young age but be aware young plants need only a gentle squeeze till you start to feel it crunch. Older plants need more pressure but are easier to do without messing it up, pliers can be used on thicker stems.
To get a plant to bush out instead of grow straight up i like to go around all the stems as close to the main branch and crush them, then just point the branch out more and leave it, itll repair itself in no time. Then a few weeks later do the same but further up the stem.
Like cam said though dont over think it, for your first grows you should be concentrating on learning your plants and the signs that they will give you if something is wrong. Learn to grow healthy plants and how to read your plants and everything will make much more sense.
Good luck and don’t over complicate it, keep it simple
░█▒█▒▄▀▄░█▀▄░▄▀▄▒█▀▄
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄
Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.
░▀▄▀░█▀█▒█▄▀░▀▄▀░█▀▄
Drugs and Alcohol are never the answer! Unless the question was “what am I doing tonight”.
- Point 5
- Registered User
- Posts: 3757
- Joined: Mon Dec 02, 2019 9:19 pm
- Location: UK
- Has thanked: 318 times
- Been thanked: 1876 times
- Status: Offline
Re: F.I.M. (F**k it, I missed)
I use the siftte green wire and slowly Iver a week pull then down 8f that makes sense it's not done in one go. I've pulled to hard before and split plant down the middle and she survived some how. These plants are up for a bit of abuseRaziel40 wrote: ↑Tue Apr 18, 2023 4:11 amWell demonstrated. Thank you. How you have them bent down so far is what I'm going to have to do with mine soon. I appreciate this post.Point 5 wrote: ↑Sun Apr 16, 2023 1:31 pmTopping isn't difficult. Let the plant grow to 5 nodes. Count up 3 nodes and there should be a bigger space to get some little snips in then just cut.
Sorry not got a photo of a plant just topped but thos one you can see I leave a bit of stem above the node.
Then as the plant grows I try to get them to grow away from each other.
- Keeno
- Registered User
- Posts: 25547
- Joined: Sat Oct 07, 2017 10:11 pm
- Has thanked: 8242 times
- Been thanked: 12990 times
- Contact:
- Status: Offline
Re: F.I.M. (F**k it, I missed)
viewtopic.php?f=6&t=4419&p=92682&hilit=Topping#p92682
Here's a guide I done to topping a while back. Has so close up pictures of where to top.
Here's a guide I done to topping a while back. Has so close up pictures of where to top.
- Keeno
- Registered User
- Posts: 25547
- Joined: Sat Oct 07, 2017 10:11 pm
- Has thanked: 8242 times
- Been thanked: 12990 times
- Contact:
- Status: Offline
Re: F.I.M. (F**k it, I missed)
LST guide in the following link. I find topping and some LST a real nice combination.
viewtopic.php?f=6&t=4340&p=91333&hilit=Lst#p91333
viewtopic.php?f=6&t=4340&p=91333&hilit=Lst#p91333