Using the paint stirrer to break it up.
After filtering off the water.
On the drying screen.
I read that you can run the same weed several times but you should use fresh water each time.
But I thought to myself, "What about the stuff that gets through the 25 micron bag?"
So here is what I did.
After running the batch each time I let the bucket sit for a bit then siphoned off the water down to about 2 cm.
I rinsed the last bit of water into a pan. Then re-ran that same batch of weed.
At the end I siphoned off more of the water out the pan.
I then let that pan sit with a fan blowing on it to evaporate all the water.
This is the pan after the water evaporated.
Started scraping it with a razor blade.
Total amount scraped. Not bad for something that would have went down the drain.
25 micron Temple Ball
73 micron Temple Ball
Stuff from the larger micron bubble bags. I couldn't get this stuff to melt together. Probably too much green material in it.
Although it still smokes pretty good.
All together I ended up with about 14.5 grams of hash.
I don't think that was too bad considering some people throw out their trim and leaves.
. I'm going to have a go 
that looks well wicked you got loads there , no stopping now for u , your on a roll 
Discord
Links
