Welcome to the general & cannabis growers discussion section. This section is for general discussions about cannabis and growing. Plenty of laughs to be found in here. To become part of our online cannabis growing community click here to register.
Extraction
- Marcus
- Registered User
- Posts: 5319
- Joined: Thu Nov 29, 2018 2:25 pm
- Has thanked: 2252 times
- Been thanked: 4153 times
- Status: Offline
Re: Extraction
My fan and filter are on the floor of my tent and I still grow dope.
This run I put it above the light and I've still grown dope.
You wanna pull wet cool air from around your pots up through your canopy or dry air from the warm light down through it?
Your choice at the end of the day I reckon.
This run I put it above the light and I've still grown dope.
You wanna pull wet cool air from around your pots up through your canopy or dry air from the warm light down through it?
Your choice at the end of the day I reckon.
- These users thanked the author Marcus for the post (total 3):
- Nom (Sun Dec 27, 2020 4:24 pm) • Guest (Sun Dec 27, 2020 4:34 pm) • Captain Beefheart (Sun Dec 27, 2020 7:01 pm)
-
- Registered User
- Posts: 7654
- Joined: Thu Jan 16, 2020 11:14 pm
- Has thanked: 6130 times
- Been thanked: 3186 times
- Status: Offline
Re: Extraction
Lol, you make me chuckle.Captain Beefheart wrote: ↑Sun Dec 27, 2020 3:46 pmI do have a decent negative pressure but the walls don't get sucked in as they are concrete
I also
I am completely with you here. Mine come off recently on the small ones I have and they work twice as good.Captain Beefheart wrote: ↑Sun Dec 27, 2020 3:46 pmThe fan has no mesh on the front as this dramatically reduces the wind by far,
- These users thanked the author Guest for the post:
- Captain Beefheart (Sun Dec 27, 2020 7:01 pm)
Treat people as if they were what they ought to be and you help them to become what they are capable of being.”
JOHANN WOLFGANG VON GOETHE
-----------------------------------------------------------------------------
"Insects and disease are the symptoms of a failing crop, not the cause of it. It's not the overpowering invader we must fear but the weakened condition of the victim."
William Albrecht
https://www.organacanna.co.uk/
JOHANN WOLFGANG VON GOETHE
-----------------------------------------------------------------------------
"Insects and disease are the symptoms of a failing crop, not the cause of it. It's not the overpowering invader we must fear but the weakened condition of the victim."
William Albrecht
https://www.organacanna.co.uk/
-
- Registered User
- Posts: 7654
- Joined: Thu Jan 16, 2020 11:14 pm
- Has thanked: 6130 times
- Been thanked: 3186 times
- Status: Offline
Re: Extraction
.......also for me on this, I don't havr loads of space, my smaller tent certainly couldn't have the filter anywhere else othere than up top and my .8 I think I would struggle. So I suppose it all depends on preference as Marcus says and people's individual circumstances. That's the beauty of growers though I suppose, we all do things differently and end up with a result regardless of experience :-)
- These users thanked the author Guest for the post:
- Captain Beefheart (Sun Dec 27, 2020 7:01 pm)
- Treetrunk
- Registered User
- Posts: 3300
- Joined: Fri Jul 03, 2020 4:45 pm
- Has thanked: 1897 times
- Been thanked: 2359 times
- Status: Offline
Re: Extraction
Nice one Captain top tipCaptain Beefheart wrote:Here's my take on it my chamber is nigh on 10ft long and 28 inch wide 9 ft high,in there I've got 1 x12 inch desktop fan running full melt 24/7 never turned off its hung below my carbon filter blowing directly across the canopy or just above,the wind hits the back wall then circulates through the dope a 1 way system !!! The fan has no mesh on the front as this dramatically reduces the wind by far,remove the mesh the day I buy them the fan pulls air from the rear it gets pushed out at the front much faster without meshing....it creates a 1 way wind tunnel my exhaust is a viper 5 inch running full melt drawing the stale warm air out of the chamber,the intake is a 10mm crack under the door frame black bagged off inside so not light leaks,the floor is also just floor boards that leak in air when sucked by the exhaust see,I do have a decent negative pressure but the walls don't get sucked in as they are concrete I'll be altering the exhaust in a few weeks by stuffing it in the attic
Then I get this
great googly moogly!
Sent from my moto g(7) power using Tapatalk
- These users thanked the author Treetrunk for the post:
- Captain Beefheart (Sun Dec 27, 2020 7:01 pm)
- Captain Beefheart
- GR420 Leg End
- Posts: 7571
- Joined: Sat Nov 04, 2017 3:05 pm
- Location: on a wet rock in the north sea
- Has thanked: 2395 times
- Been thanked: 3763 times
- Contact:
- Status: Offline
Re: Extraction
well rik bach i tell it how it really is.
Treetrunk wrote: ↑Sun Dec 27, 2020 5:09 pmwell treetrunk if it helps some poor fuka out ive done my bit see.Nice one Captain top tip
Sent from my moto g(7) power using Tapatalk
- These users thanked the author Captain Beefheart for the post (total 2):
- Grower88 (Sun Dec 27, 2020 10:45 pm) • Treetrunk (Mon Dec 28, 2020 9:40 am)
- Captain Beefheart
- GR420 Leg End
- Posts: 7571
- Joined: Sat Nov 04, 2017 3:05 pm
- Location: on a wet rock in the north sea
- Has thanked: 2395 times
- Been thanked: 3763 times
- Contact:
- Status: Offline
Re: Extraction
all i can see now is all the dopers ripping off the front mesh on their fans.... just watch ya earholes on the fuking blade
- These users thanked the author Captain Beefheart for the post (total 3):
- Grower88 (Sun Dec 27, 2020 10:44 pm) • Guest (Sun Dec 27, 2020 11:37 pm) • Treetrunk (Mon Dec 28, 2020 9:40 am)
-
- Registered User
- Posts: 7654
- Joined: Thu Jan 16, 2020 11:14 pm
- Has thanked: 6130 times
- Been thanked: 3186 times
- Status: Offline
Re: Extraction
I've caught my elbow a couple of times lol They'll have me glasses of nextCaptain Beefheart wrote: ↑Sun Dec 27, 2020 10:16 pmall i can see now is all the dopers ripping off the front mesh on their fans.... just watch ya earholes on the fuking blade
- These users thanked the author Guest for the post:
- Captain Beefheart (Mon Dec 28, 2020 6:50 pm)
- Treetrunk
- Registered User
- Posts: 3300
- Joined: Fri Jul 03, 2020 4:45 pm
- Has thanked: 1897 times
- Been thanked: 2359 times
- Status: Offline
Re: Extraction
Just done itCaptain Beefheart wrote:all i can see now is all the dopers ripping off the front mesh on their fans.... just watch ya earholes on the fuking blade
Sent from my moto g(7) power using Tapatalk
- These users thanked the author Treetrunk for the post:
- Captain Beefheart (Mon Dec 28, 2020 6:50 pm)
- seymore_budz
- Registered User
- Posts: 2389
- Joined: Mon Sep 09, 2019 7:18 pm
- Has thanked: 619 times
- Been thanked: 1448 times
- Contact:
- Status: Offline
Re: Extraction
I actually cut my old boy on a fan with no guard It wasn't that long ago either. I was using an old fan in the same way you was and working in the room in my pants (as you do). Spun around too grab something and grinded my meat. Fuck me it hurt! Actually took the skin off
- These users thanked the author seymore_budz for the post (total 3):
- Grower88 (Mon Dec 28, 2020 9:48 am) • Captain Beefheart (Mon Dec 28, 2020 6:51 pm) • Guest (Mon Dec 28, 2020 8:15 pm)
Those who can make you believe absurdities can make you commit atrocities.
- Grower88
- Registered User
- Posts: 547
- Joined: Sun Apr 26, 2020 2:39 pm
- Has thanked: 124 times
- Been thanked: 148 times
- Status: Offline
Re: Extraction
So sb is now meatless! Awesomeseymore_budz wrote:I actually cut my old boy on a fan with no guard It wasn't that long ago either. I was using an old fan in the same way you was and working in the room in my pants (as you do). Spun around too grab something and grinded my meat. Fuck me it hurt! Actually took the skin off
Sent from my VOG-L09 using Tapatalk
- These users thanked the author Grower88 for the post (total 2):
- Captain Beefheart (Mon Dec 28, 2020 6:51 pm) • seymore_budz (Mon Dec 28, 2020 7:54 pm)