building a grow

[MediGrower]

hi guys and thanks for your input

I think ive seen the hard wood and fridge methods while lookiing into it but the method i saw was more to do with limiting the light the cuttings get per day making them dormant but im assuming enough DLI to just keep them going. I guess in nature its the equivilent of a slow or cold start to the summer?

so i thought this could maybe be achieved by using the main grow room light with the cuts in a propogator then remove to cold/dark box. leaving the light in main groom to finish its 12h cycle for the continuing mothers.

as im starting from seed this would mean i could bring the seed to mother stage for clones but also bring those to harvest and keep the cutting cold store for the remaining few weeks ready for the next run.

just wondered if anyone had success with similar method of perpetual growing

[B.G.]

If the box is above 5 degrees the cuts will dry out and die .
The fridge method works and once the door is shut they are in darkness and in a controlled environment.

I've always grown perpetually and two rooms is a must .
Best to keep a mother plant and take cuts from her .
Although you can take cuts from cuts and cuts from them eventually you'll want a mother .
Take a cut from a healthy happy plant and you get a healthy happy cut .
Take a cut from a weak stressed plant and you get a stressed weak cutting


from a green and pleasant land